-
-
XENON ULTIMA HEADLAMP UPGRADE Code: DA5014 Right hand drive kit H4 bulbs included Pair Defender Range Rover Classic Series More light on the road. Xenon 7” universal fit headlamp upgrade kit includes Xenon Ultima. Xenon Ultima is the first auto bulb to put 120% more light on the road. The lamps have a complex surface to give a superior light distribution. They are E approved, fully road legal and the kit includes headlamp units and xenon bulbs. -
-
-
-
TWIN SHOCK TURRETS Code: DA6322L 2” Lift Front Defender Discovery 1 Range Rover Classic Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber turrets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease. The single shock absorber turret is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean. The twin shock absorber turret is manufactured from the same quality steel as the single shock absorber turret but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the turrets. Note - Fitting shock absorber turrets may require some vehicle modification, please ask distributor for full details. -
TWIN SHOCK BRACKETS - KIT Code: DA6324 Rear Defender Discovery 1 Range Rover Classic Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber brackets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease. The single shock absorber bracket is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean. The twin shock absorber bracket is manufactured from the same quality steel as the single shock absorber bracket but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the brackets. Notes > Rear brackets involve some welding to fit. > Fitting shock absorber brackets may require some vehicle modification, please ask distributor for full details. -
Treesliders Rocksliders Sill Footsteps Defender 110 – Pair COD: DUM0003 Hardy and comfortable Treeslider, with just one component you will have three major uses: Footsteps, Treeslider and Sill -
Tensioner-automatic ancillary drive CODE : ERR4708G -
SWITCH-HRW Code: YUG000470LNF -
-
SWING AWAY REAR DOOR MOUNT SPARE WHEEL CARRIER Code: DA2232G Defender - all models Series Note - Only suitable for wheels with a positive offset of 20mm or less -
SWING AWAY REAR DOOR MOUNT SPARE WHEEL CARRIER Code: DA2274 With half door tailgate Defender -
SWING AWAY REAR DOOR MOUNT SPARE WHEEL CARRIER Code: DA2232 Defender - all models Series -
-
-
STAINLESS STEEL DOOR THRESHERS Code: DA4793 Front & 2nd row door threshers For vehicles without sill seat belt mounts Defender - from 1983 onwards Series 2 & 3 These stainless steel door threshers will freshen up the inside of your Land Rover as this is an area is which can get very scruffy. All of the existing holes on the sills line up with these doors threshers so they are a quick, easy bolt on project. The door threshers are made from stainless steel 304 grade bright annealed 1.5mm thick and are laser cut and CNC pressed. Stainless steel fixings are supplied. Note - If your door seal is fitted to your sill rail, you may need to modify the sill rail. -
SPRING SEAT Code: NRC9700GALV Galvanised Defender Discovery 1 Range Rover Classic -
Code: DA7305 Black/Red fabric SINGLE Defender - excluding truck cabs* Redesigned bolsters for greater support and new padding configurations for improved comfort > Lightweight and compact > High comfort > Tubular frame construction > High quality recline mechanism for smooth and easy adjustment > Compatible with 3 or 4 fixing point harnesses > Base mounted - 271 x 345mm Drawing on decades of racing history, Sparco has created a line of street car seats that offer the ultimate in comfort and performance. The ergonomic designs help cradle and protect the driver against even the most demanding lateral forces. The R100 is Sparco’s latest incarnation of groundbreaking steel-model seats. It features redesigned bolsters for greater support and new padding configurations for improved comfort. It has been built with comfort and support in mind but it's lower side bolsters and slightly narrower steel frame allow it to fit into vehicles where fitting seats with larger side bolsters may be difficult. The seat features backrest harness slots so that it can be used with a race type harness or normal seatbelts. The seats can be reclined using the double adjuster lever. Made from a durable fabric, the R100 is available in single tone or duo-tone styles. Duo-tone styles feature contrasting side accenting and stitching to match any interior. The Sparco R100 Seat range is designed to attach using Sparco vehicle specific seat mounts. *Not suitable for vehicles with truck cabs fitted as they restrict the leg room in the vehicle. -
-
-
SINGLE SHOCK TURRETS Code: DA6323L 2” Lift Front Defender Discovery 1 Range Rover Classic Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber turrets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease. The single shock absorber turret is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean. The twin shock absorber turret is manufactured from the same quality steel as the single shock absorber turret but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the turrets. Note - Fitting shock absorber turrets may require some vehicle modification, please ask distributor for full details. -
RACK MOUNT CLAMPS Code: SACS001 Single Single clamp > Anodized clamp - upper and lower sections > Protective rubbers - protects roll-cage finish > M8 stainless bolts and spring washers For mounting accessories such as a roof-rack, snorkel or aerial to your roll-cage. Suitable for any Safety Devices Expedition external roll-cage, as well as any other roll-cage which uses 45mm diameter tubing. The upper mounting hole is M8 threaded. -
SILICONE TURBO HOSE KIT Code: DA3174B Intercooler hose kit 2 piece kit Defender - 2.4 Tdci Will not rot or perish > Quality silicone intercooler hoses designed to operate at a higher temperature then the original hoses. > Fits with both standard and performance intercoolers. > Will not rot or perish like standard rubber hoses. -
SILICONE TURBO HOSE KIT Code: DA4578 Intercooler hose kit 2 hose kit Defender - 2.2 - 2011 onwards Will not rot or perish > Quality silicone intercooler hoses designed to operate at a higher temperature then the original hoses. > Fits with both standard and performance intercoolers. > Will not rot or perish like standard rubber hoses. -
SILICONE TURBO HOSE KIT Code: DA3209 Engine to intercooler Equivalent to LR066344 Defender - 2007 onwards > Quality silicone hoses are designed to operate at a higher temperature than the original hoses. > Will not rot or perish like rubber hoses. -
SILICONE TURBO HOSE KIT Code: DA3210 Air inlet connector Equivalent to LR067644 Defender - 2007 onwards > Quality silicone hoses are designed to operate at a higher temperature than the original hoses. > Will not rot or perish like rubber hoses. -
SILICONE COOLANT HOSE KIT Code: DA4575 Coolant hose kit 5 piece kit Defender - 2.4Tdci - 2007 - 2012 > Quality silicone hoses are designed to operate at a higher temperature than the original hoses. > Will not rot or perish like rubber hoses. -
SILICONE COOLANT HOSE KIT Code: DA4570 Coolant hose kit 3 piece kit Defender - 300Tdi > Quality silicone hoses are designed to operate at a higher temperature than the original hoses. > Will not rot or perish like rubber hoses. Important - Jubilee clips are NOT included with the kits -
SILICONE COOLANT HOSE KIT Code: DA4574 Expansion tank bleed kit 3 piece kit Defender - 200Tdi Defender - 300Tdi Discovery 1 - 200Tdi Discovery 1 - 300Tdi > Quality silicone hoses are designed to operate at a higher temperature than the original hoses. > Will not rot or perish like rubber hoses. -
SHOCK ABSORBER & SPRING KIT Code: DA4286HD Super Gaz Heavy-duty 40mm lift Defender 90 Discovery 1 Range Rover Classic Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for! Kit contents > Springs - front & rear - pair > Britpart Super Gaz Shock Absorbers - front & rear - pair Shock Absorbers Britpart Super Gaz Shock Absorbers offer a 35mm bore tube filled with Fuchs shock absorber fluid, using the best seal available, single piece eye rings, polyurethane bush mounts and a very durable powder coated finish. These offer a vast improvement in ride quality and damping performance. Coil Springs Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
SHOCK ABSORBER & SPRING KIT Code: DA4287 Super Gaz Heavy-duty 40mm lift Defender 110 Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for! Kit contents > Springs - front & rear - pair > Britpart Super Gaz Shock Absorbers - front & rear - pair Shock Absorbers Britpart Super Gaz Shock Absorbers offer a 35mm bore tube filled with Fuchs shock absorber fluid, using the best seal available, single piece eye rings, polyurethane bush mounts and a very durable powder coated finish. These offer a vast improvement in ride quality and damping performance. Coil Springs Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
-
SHOCK ABSORBER & SPRING KIT Code: DA4287C Cellular Dynamic Heavy-duty 40mm lift Defender 110 Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for! Kit contents > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair Shock Absorbers The Britpart Cellular Dynamic Shock Absorber represents a significant advance in Land Rover suspension systems.It features a cellular foam insert instead of a normal nitrogen gas or air, this is to stop the oil from boiling. The foam takes up less room which means more room for oil, 50% more, which offers maximum heat dispersion. This heat dispersion translates to a very subtle but controlled ride that will not fade no matter how hard you push them. They are ideal for a driver who needs more control to complement performance improvements or to enhance a standard vehicle. The unique design ensures ride comfort and cornering ability is maximised and of course they are superb off-road. > Cellular technology tube > Sintered 18mm rod > Reinforced welded mounts > Polyurethane bush > Single piece eye ring > Heavy-duty powder coating Coil Springs Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
SEAT BELT STRESS PLATE Code: DA3502 FIA specification stress plate with 65mm square backing plate and 7/16th captive nut. -
SEAT BELT BLACK Code: BTR6563 -
SEAT BELT ASSY Code: EVL501090PMALR -
SEAT BELT ASSY Code: EVL501080PMALR -
SEAL glazing rubber windscreen Code: LR056278 -
SEAL - TAILGATE Code: LR044314 -
SEAL - ROOF SIDE MOULDING ( REAR UPPER BODY ) Code: DBF500040 -
SEAL - INNER Code: MTC4994 -
SEAL - FELT - REAR WINDOW STATION WAGON Code: RTC6462 -
SAFETY DEVICES ROLL CAGE PADDING KIT Code: RBL1387PAD Black Defender 90 - Station Wagon without bulkhead, 2-door Padding kit for internal section of RBL1387SSS roll cage Unrivalled quality... Specially formulated polyurethane flame retardant padding kits of 55 Shore hardness. Kit covers all internal roll cage components above shoulder height. -
-
ROOF TENT MOUNTING BRACKET Code: 20-6000-755 Suitable for any Safety Devices Expedition external roll cage, as well as other roll-cages using 45mm diameter tubing. -
ROOF CROSS RAIL Code: DA4711 Explorer roof rack Gutter mount 4kgs Defender 90 - hard top & station wagon Defender 110 - hard top & station wagon Defender 110 - double cab/crew cab pick-up Defender 130 - double cab/crew cab pick-up Additional roof cross rails for use without a roof rack for use as, for example, a roof bar, basic tent support, attaching a roof storage box or to spread additional load on the Safety Devices' roof rack. Refer to owners handbook for recommended maximum weight. -
RING LED UNDER BONNET INSPECTION LAMP Code: DA5065 3 x 5W LEDs provide 1,000 lumens light output Features > Long operating time allows full working day usage. > 3 levels of light output. > 6000K colour temperature for bright white light. > 40° adjustable head to shine light on the engine bay exactly where it is required. > 60° wide angle illumination. > Sturdy polycarbonate, ABS and aluminium construction. > Rechargeable 3.7V 10,400mAh li-ion battery. > Hook design allows usage with different vehicle types including, cars, vans and 4x4s. > Illuminated battery status indicator. > Includes AC mains adaptor. Specfications > Light output: 1000 lumens (3 lamps) 675 lumens (2 lamps) 350 lumens (2 lamps) > Operating time: 6 hours (3 lamps) 10 hours (2 lamps) 15 hours (1 lamp) > Battery: 3.7V Li-ion 10400mAh 38.48Wh > Main adaptor: Input: 230V AC 50/60Hz > Output: 5V DC 2000mA -
RED SEAT BELT Code: DA5057 Front Equivalent to BTR6563 Defender - station wagon Add a splash of colour to your Defender’s interior by fitting a set of these red seat belts. Type approved.
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
