Code: DA5735
- Defender - up to FA
-
-
Land Rover Defender Bonnet security Hinges black or silver ,Stylish looking but essential to stop the thieves stealing the bonnet that can cost you a lot of money to replace. Easy to fit and comes with the security bit for the screw.- Black Or Silver
- Aluminium billeted
- Comes with fixings
- Security bit comes with kit
- Easy to fit
-
BRAKE PEDAL SWITCH Code: PRC4297 -
EXPEDITION ROOF RACK Code: DA3070 2.75m long x 1.50m wide Defender 110 Extremely strong, versatile and easy to use These Defender roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile and easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. > 4 feet per side > Weight - 38kgs > Vehicle gutter to top of rack - 265mm -
BRITPART EXPEDITION ROOF RACK Code: DA3072 2,050mm L x 1,500mm W Vehicle gutter to top of rack - 265mm 3 feet per side 32kg Defender 90 Extremely strong, versatile and easy to use These roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile, with a low profile and are easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. -
BRITPART EXPEDITION ROOF RACK Code: DA3269 1.60m long x 1.50m wide Defender 110 Double cab pickup Defender 130 Double cab pickup Extremely strong, versatile and easy to use These Defender roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile and easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. > 3 feet per side > Weight - 27kgs > Vehicle gutter to top of rack - 265mm -
BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4202 Front pair Lift - 40mm Load - 50kg Defender 90 Defender 110 Defender 130 Discovery 1 Range Rover Classic Bar diameter - 16mm Rate - 230lbs/in Free height - 390mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
BRITPART PERFORMANCE LIFTED SPRINGS Code: DA4208 Rear pair Lift - 50mm Load - 500kg Defender 110 Defender 130 Bar diameter - 21mm Rate - 420lbs/in Free height - 445mm The right choice when replacing the old sagging original springs! Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
Code: DA1072Metal - chrome finish Single- Range Rover L322
- Range Rover Sport - Mk1
Enhance your Range Rover's appearance!
-
-
-
Code: DA1203- Defender - 2002 onwards
Does your Defender's rear door sometimes close on you unexpectedly?
This neat and easily installed gas strut kit will solve that problem and replaces the original door stopper. The gas strut will hold the door in place when open - even with a spare wheel in place - and will assist in the opening of the rear door too with a smoother and more controlled movement. Complete with fittings and instructions. -
Code: DA1350BlackMade in the UK exclusive for Bowler, these lightweight, high strength wheels are TUV tested and are used in the Defender Challenge. They are 7.5" wide and will accept tyres ranging from 235 - 265 wide (including the standard 16" Land Rover options of Continental Cross Contacts or Goodyear MTR). Maximum load rating 1,250kg. -
-
Enhance your Defender's appearance!
Made from GRP (glass-reinforced plastic AKA fibreglass) this Defender Puma bonnet is half the weight of the original Land Rover bonnets. The bonnet has return edges on all four sides underneath for strength and to make it more rigid. It has strengthened hinge points and is supplied with stainless steel hinge-bolts & screws.Code: DA1963White- Defender 90 - 1984 onwards
- Defender 110 - 1983 onwards
-
Code: DA2067Single Natural aluminium finish- Defender - without wiper
- Series - without wiper
Add some heavy-duty protection to your Land Rover!
-
Code: DA2068Single Natural aluminium finish- Defender - with wiper - late
Add some heavy-duty protection to your Land Rover!
-
Code: DA2250BElectroplate finish- Defender
- Discovery 1
- Range Rover Classic
Give your vehicle some extra protection with a diff guard.
This guard is simple to fit (no drilling) and has the added advantage of having the fill plugs accessible at all times. -
Code: DA2440 Front - RHS Manual window Black Defender - 1987 up to 5A689036 Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2441 Front - LHS Manual window Black Defender - 1987 up to 5A689036 Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2480 Rear - RHS Manual window Black Defender Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2481 Rear - LHS Manual window Black Defender Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2499 3 piece door lock button kit Defender -
Code: DA2603 Normal interior finish fascia plate Suitable for right & left hand drive models Defender - 2007 onwards Neat storage solution. This glove box is for the new Defender which utilises the available dashboard space. Ideal for storing all the usual small items you carry with you. Robust construction and easy to fit with all the necessary parts supplied. -
Code: DA2603CFCarbon fibre effect finish facia plate Suitable for right & left hand drive models- Defender - 2007 onwards
Neat storage solution.
This glove box is for the new Defender which utilises the available dashboard space. Ideal for storing all the usual small items you carry with you. Robust construction and easy to fit with all the necessary parts supplied. -
New black mesh trim Defender 'Chubby' box Extra padded lid! Fitting a Britpart ‘Chubby’ box in your Land Rover will not only help you keep your vehicle clutter free but it will also make driving more of a pleasure with the extra padded lid. Our standard cubby boxes have a 20mm thick lid while the ‘Chubby’ boxes have a lovely thick and comfy 80mm thick lid. With a double cup holder as standard, split drinks are a thing of the past. Hand-built in the UK, these quality cubby boxes are suitable for Series 3 and Defenders. Well crafted with precision tools using a hard wearing leatherette outer with locking stay brass hinges. Top - Black mesh Body - Black For Defender For Series 3 -
Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material.
Pioneered in Australia in the early 1980’s, Safari Snorkels were born out of a need to protect 4WD engines from the hazards of dust and water commonly encountered in touring and off road applications. Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability. In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust. Note - Fitment from seated internal view. -
Satin black finish Pair- Defender
Add some heavy-duty protection to your Land Rover!
-
Code: DA4049SPainted silver finish Pair- Defender
Add some heavy-duty protection to your Land Rover!
-
Code: DA4071Pair Natural aluminium finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4071BPair Satin black finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4100Pair Natural aluminium finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4100BPair Satin black finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4260Corresponds to ESR4238- Defender 90/110/130 - Td5 - 1999 - 2007
- Discovery 2 - 4.0i - 1999 - 2004
- Discovery 2 - Td5 - 1999 - 2004
- Freelander 1 - V6 petrol
- Range Rover P38 - diesel from WA376580
- Range Rover P38 - diesel from TA346794 up to VA376579
- Range Rover P38 - petrol from XA410482
- Range Rover P38 - petrol from VA346794 up to VA376579
- Range Rover P38 - petrol from WA385949 up to WA410481
A breath of fresh air for your Land Rover
> Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergentBreathing efficiency for your engine means more power or better fuel mileage
-
Code: DA4368Heavy-duty Kit includes Plus 5" shock absorbers*- Defender 110 - from 1994 - wide bush
Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!
Kit contents - > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair > Radius arms - front & rear > Spring retainers - front & rear > Bush sets -
Code: DA4379Corresponds to PHE500060- Defender - from 2007 onwards
A breath of fresh air for your Land Rover
> Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergentBreathing efficiency for your engine means more power or better fuel mileage
-
Code: DA4599Solves the problem of that crude and annoying blast of hot air to your lower legs.- Defender - 2007 onwards
The MUD Heater Deflector solves the problem of that crude and annoying blast of hot air to your lower legs in all Puma engine Defenders. The Heater Deflector redirects the flow of air from the lower heater outlets forwards into the footwell, rather than directly at your legs to create a more comfortable driving environment. The Heater Deflector moulding fixes easily in place using the supplied push-fit fasteners and can be fitted in 5-minutes. All you need is a 4.5mm drill. Position the Heater Deflector, drill the fixing holes in the lower dash section and fix the Heater Deflector in place using the push-fit fasteners. -
Code: DA4629Grey- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4629BBlack- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4649 Black Defender Suitable for 1 door -
24 splines axle shaft to diff end- Defender - non-ABS and ABS models from LA up to 2007
Save time and money with a Britpart CV Joint kit!
Britpart has put together these boxed kits to help the fitter have all the necessary parts to do the job in one hit, saving time and money trying to find the necessary parts to do the job. These kits are also helpful to pass over the trade counter instead of having to hunt for the individual parts. One kit does one CV joint. -
No drilling required for fitment.
The Britpart wind deflectors will reduce buffeting and wind noise when driving with the window open. Custom designed for each vehicle and easily attached - no drilling required for fitment!Code: DA6078Front 2 piece kit- Defender
- Series
-
Code: DA6641280 pieces.Box of assorted popular trim clips and fixings commonly used on Land Rovers. Supplied in a handy presentation box. Contents 35 x Rivet - AFU1075 15 x Trim fastener - ANR2224 15 x Scrivet - DYQ100230 15 x Scrivet - AWR3994 15 x Scrivet - DYQ100320 25 x Finisher clip - DYC101420 20 x Stud door casing - MWC9134 20 x Stud door casing - blue - MWC9134BLUE 20 x Fastener - MXC1800 60 x Snapsac - MWC3136 25 x Door casing stud - DKP5279L 15 x Fir tree roof insulation retainer - DA1634 -
Enhance your Defender's look with a pair of these smart and robust side protectors. -
Code: DA8092Bonnet- Defender - 2007 onwards
Use it on your doors, floor, roof, bonnet and loadspace.
Dynamat Xtreme is the highest efficiency sound deadening material available and the most effective product for stopping noise and vibration. Dynamat Xtreme can be used on any and all interior sheet metal and fibreglass body panels. The aluminium constraining layer is very moldable and conforms easily to all interior surfaces. The patented extra sticky butyl layer is formulated with VECTOR chemistry for the most amazing energy conversion capabilities ever. Use it on your doors, floor, roof, bonnet and loadspace for a quiet, cool and incredibly solid ride. > Create a solid, luxury car feel with a reduction in road noise. > Stop resonance & vibrations, reduces buzzes & rattles. > Improved sound. Get more bass. Hear more of your music. > For use throughout your vehicle interior, the first step to an improved Land Rover. Britpart is the official Dynamat wholesaler in the Land Rover aftermarket. -
LED side repeaters Code: DA8531 Smoked LED side repeaters Sold as a pair For LR Defender - Td5 onwards -
DEFENDER 95mm LIGHT PLINTH -
Fed up with winding your windows up and down?
Make life easier, add electric front windows to your Defender with this comprehensive kit. Includes fitting instructions.