Performance

  • 300 Tdi VGT uprated turbocharger CODE : ASE04 Category: VGT & Hybrid Turbochargers Fits: Defender 300 Tdi, Discovery 300 Tdi, Range Rover 300 Tdi
  • Bilstein B6 Defender Kit with Ride Control function Are Suitable for all Defender TD5 and Puma (TDCI) Models. Performance you can feel. Adjustable Dampening straight from the drivers seat!. If you expect more damping power from your shock absorber – even under loads – the BILSTEIN B6 is the ideal solution. The product benefits at a glance: Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads Optimum adhesion and enhanced lane change stability in both day to day and extreme situations Marked improvement in safety and sportiness without additional spring changes (lowering) BILSTEIN gas pressure technology BILSTEIN mono-tube/Upside-Down technology, made in Germany Road-tested by BILSTEIN and fine-tuned No German TÜV registration required WHAT IS RIDE CONTROL? An exclusive system that enables settings to be made by means of push buttons on the controller Lightning-quick switching from convenient “normal“ mode to high-powered “sport“ setting
  • The 200/300 Tdi Organic: Fitted with HD1, the top commercial lining manufactured and used by Clutchfix Ltd, is a heavy duty application for drivers running a remapped engine, upto 160BHP. We use this material for the fleets we look after including the 200Tonne Liebherr Cranes run by Ainscough Crane hire. It has also had a 20% increase in poundage from the O.E Borg & Beck kit. It is a great daily drive, giving you peace of mind that it is a better grade of material than that supplied by LUK or Valeo. It will deal with some green laning and towing (nothing too serious).
    The Clutch is Supplied with the Following: 1 x Clutch Plate 1 x Clutch Cover 1 x Bearing
  • CLUTCHFIX Land Rover Defender Puma 2.2/2.4 Tdci Clutch Fitted with HD1, the top commercial lining manufactured and used by Clutchfix Ltd, is a heavy duty application for drivers running a remapped engine, upto 210BHP. We use this material for the fleets we look after including the 200Tonne Liebherr Cranes run by Ainscough Crane hire. It has also had a 20% increase in poundage from the O.E Land Rover kit. It is a great daily drive, giving you peace of mind that it is a better grade of material than that supplied by Land Rover. It will deal with some green laning and towing (nothing too serious). The Clutch is Supplied with the Following: 1 x Clutch Plate 1 x Clutch Cover 1x bearing and slave kit 
  • The Puma 2.2/2.4 Tdci Ceramic clutch Fitted with an 8 paddle ceramic sprung drive plate, gives you an increase in up-take of 40% from the peddle, meaning the clutch grips and moves faster than the HD organic kit, meaning the Clutch cover itself is doing less work. It has also had a 20% increase in poundage from the O.E Land Rover kit. Needs 500 miles of soft driving at 1/4 throttle to allow all faces to mate and bed correctly. Failure to do so will end in a  glazed drive plate and slip. The Clutch is Supplied with the Following: 1 x Clutch Plate 1 x Clutch Cover 1 x Release bearing (please note some 2.2 tdci models are fitted with a different type of release bearing, if the different type is fitted this will need to be purchased through a main agent)
  • The TD5 Ceramic clutch Fitted with an 8 paddle ceramic rigid drive plate, gives you an increase in up-take of 40% from the peddle, meaning the clutch grips and moves faster than the HD organic kit, meaning the Clutch cover itself is doing less work. Suitable to run with DMF. Needs 500 miles of soft driving at 1/4 throttle to allow all faces to mate and bed correctly. Failure to do so will end in a  glazed drive plate and slip.
    The Clutch is Supplied with the Following: 1 x Clutch Plate 1 x Clutch Cover 1 x Bearing
  • The TD5 Organic  Fitted with HD1, the top commercial lining manufactured and used by Clutchfix Ltd, is a heavy duty application for drivers running a remapped engine, upto 190BHP. We use this material for the fleets we look after including the 200Tonne Liebherr Cranes run by Ainscough Crane hire. It is a great daily drive, giving you peace of mind that it is a better grade of material than that supplied by LUK or Valeo.
    It will deal with some green laning and towing (nothing too serious). The Clutch is Supplied with the Following: 1 x Clutch Plate 1 x Clutch Cover 1 x Bearing
  • A brand new direct replacement high performance aluminium intercooler from AlliSport. This intercooler has been designed to directly replace the original smaller intercooler on the Land Rover Defender, Discovery or Range Rover 300Tdi engine and has 50% more surface area than the original. Combined with the correct tuning (instructions included) power will increase from 111bhp standard to 135bhp with a similar increase in torque. The greater cooling capacity will allow up to 20% increase in power and torque in the lower and mid-range revs. Customers regularly report 10-12% gain in economy. There are minimal alterations necessary to the vehicle, as the kit is a direct replacement. Because the intercooler is far more efficient than the standard item, the fuel pump will need setting to compensate for the change in mixture. The settings are straightforward and are covered in the comprehensive fitting instructions. As your vehicle is not electronically controlled, there is no ECU to remap, so we optimise the fuel and boost settings to match the intercooler mechanically. Cylinder head thermal stress is actually reduced as the EGT or combustion temperature is reduced dramatically Specification:- 50% greater surface area external dimensions as per original intercooler 65mm Thick special high performance vacuum brazed core Fully TIG welded in house Makes full use of the space available whilst keeping external dimensions the same Tuning instructions included
  • Code: DA1350
    Black
    Made in the UK exclusive for Bowler, these lightweight, high strength wheels are TUV tested and are used in the Defender Challenge. They are 7.5" wide and will accept tyres ranging from 235 - 265 wide (including the standard 16" Land Rover options of Continental Cross Contacts or Goodyear MTR). Maximum load rating 1,250kg.
  • Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material.

    Pioneered in Australia in the early 1980’s, Safari Snorkels were born out of a need to protect 4WD engines from the hazards of dust and water commonly encountered in touring and off road applications. Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability. In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust. Note - Fitment from seated internal view.
  • Code: DA4260
    Corresponds to ESR4238
    • Defender 90/110/130 - Td5 - 1999 - 2007
    • Discovery 2 - 4.0i - 1999 - 2004
    • Discovery 2 - Td5 - 1999 - 2004
    • Freelander 1 - V6 petrol
    • Range Rover P38 - diesel from WA376580
    • Range Rover P38 - diesel from TA346794 up to VA376579
    • Range Rover P38 - petrol from XA410482
    • Range Rover P38 - petrol from VA346794 up to VA376579
    • Range Rover P38 - petrol from WA385949 up to WA410481

    A breath of fresh air for your Land Rover

    > Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergent

    Breathing efficiency for your engine means more power or better fuel mileage

  • Code: DA4368
    Heavy-duty Kit includes Plus 5" shock absorbers*
    • Defender 110 - from 1994 - wide bush

    Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!

    Kit contents - > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair > Radius arms - front & rear > Spring retainers - front & rear > Bush sets
  • Code: DA4379
    Corresponds to PHE500060
    • Defender - from 2007 onwards

    A breath of fresh air for your Land Rover

    > Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergent

    Breathing efficiency for your engine means more power or better fuel mileage

  • Code: DA5726
    Black/ air leather
    Black polyurethane is combined with airleather inserts for the grip of the Quark. The upper section is thinner and gets thicker on the handle to improve comfort. Diameter 350mm Dish 40mm Spoke Color Black Grip Shape Circular Grip Section 28mm x 35mm Coating Material Polyurethane Coating Color Black Insert Black
  • AlliSport TD5 EGR Removal Kit suitable for Defender and Discovery. NEW 2015 design for vehicles up to 2001 without heat exchanger! No need to worry about removing the rusty small bolts in the exhaust manifold that are prone to breaking off as with all other kits! Now supplied with a Lifetime Warranty! Removal of the Exhaust Gas Recirculation (EGR) system is widely recognised as a simple and effective method of improving the efficiency of a turbo diesel engine.   The EGR allows hot, used gases back into the engine and can cause excessive black smoke and lack of power.  Cool air is fundamental for efficient, clean combustion and power! Our EGR bypass system not only stops the hot, second – hand air entering the engine, but also removes the restriction caused by the original EGR set up, which is considerable particularly on later engines. The AlliSport design of EGR valve bypass does not interfere with the engine ECU systems, and will not cause any warning lights to occur. Original manufacturers replacement EGR valves are expensive and likely to fail again.   Our kits are precision laser cut and professionally TIG welded by hand in house.
  • AlliSport TD5 EGR Removal Kit suitable for Defender and Discovery Late Models (2001 to 2006) Lifetime Warranty! Revised August 2015 to include 5mm stainless steel blanking plate. Removal of the Exhaust Gas Recirculation (EGR) system is widely recognised as a simple and effective method of improving the efficiency of a turbo diesel engine.   The EGR allows hot, used gases back into the engine and can cause excessive black smoke and lack of power.  Cool air is fundamental for efficient, clean combustion and power! Our EGR bypass system not only stops the hot, second – hand air entering the engine, but also removes the restriction caused by the original EGR set up, which is considerable particularly on later engines. The AlliSport design of EGR valve bypass does not interfere with the engine ECU systems, and will not cause any warning lights to occur. Original manufacturers replacement EGR valves are expensive and likely to fail again.   Our kits are precision laser cut and professionally TIG welded by hand in house.