Service Items

  • Code: DA4379
    Corresponds to PHE500060
    • Defender - from 2007 onwards

    A breath of fresh air for your Land Rover

    > Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergent

    Breathing efficiency for your engine means more power or better fuel mileage

  • 24 splines axle shaft to diff end
    • Defender - non-ABS and ABS models from LA up to 2007

    Save time and money with a Britpart CV Joint kit!

    Britpart has put together these boxed kits to help the fitter have all the necessary parts to do the job in one hit, saving time and money trying to find the necessary parts to do the job. These kits are also helpful to pass over the trade counter instead of having to hunt for the individual parts. One kit does one CV joint.
  • Tensioner-automatic ancillary drive CODE : ERR4708G
  • Code: DA4260
    Corresponds to ESR4238
    • Defender 90/110/130 - Td5 - 1999 - 2007
    • Discovery 2 - 4.0i - 1999 - 2004
    • Discovery 2 - Td5 - 1999 - 2004
    • Freelander 1 - V6 petrol
    • Range Rover P38 - diesel from WA376580
    • Range Rover P38 - diesel from TA346794 up to VA376579
    • Range Rover P38 - petrol from XA410482
    • Range Rover P38 - petrol from VA346794 up to VA376579
    • Range Rover P38 - petrol from WA385949 up to WA410481

    A breath of fresh air for your Land Rover

    > Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergent

    Breathing efficiency for your engine means more power or better fuel mileage

  • Alternator for Defender Puma 2.4 TD4 Engine Part Number: YLE500310
    PART NUMBER ALT487CP
    DESCRIPTION: BOSCH 0121615
    VOLTAGE: 12V
    OUTPUT: 150A
    REGULATOR: INTERNAL
    PULLEY TYPE: PVR7, CLUTCH PULLEY
    FAN: IF
    AVAILABILITY: IN STOCK
  • ULTRAspec Release Bearing FTC5200 is a super strong and reliable direct replacement for the standard Land Rover clutch release bearing part number FTC5200. The Ultra spec Release Bearing has added features to ensure you get the best possible solution for the job. Fits TDI, TD5, Series 3, V8 and all applications where FTC5200 is originally used. Comes with a LIFETIME warranty.

    Description

    The ULTRAspec Release Bearing is the Ultimate in Land Rover Clutch Release Bearings. We’ve taken the application and the concept of a standard plastic carrier with a bearing that is adequate then taken it to a new level. Our custom designed ULTRAspec Release Bearing  has been engineering from start to finish with Maximium Strength and Reliability in mind.We’ve taken onboard all the issues that the standard type bearing causes and all the flaws it has and addressed each of them thoroughly. We’ve made no compromises and applied the correct design features to maximise the potential of our product. We’ve selected the right material grade that will take extreme abuse and cope with temperatures beyond what could be produced by even the hardest working vehicle. Unlike current modified release bearings carriers on the market we’ve not used the standard bearing. In our opinion its too small for modern applications and certainly not suitable for anything that been modified. As a result we’ve discarded it, started a fresh and sourced a bearing that is more than man enough, a bearing that is capable of loads far in excess of the application we will be using it for – this means it’ll never be tested and will always be reliable. In addition to making our ULTRAspec Release Bearing Strong and Reliable, we’ve made it long lasting adding a simple feature that allows grease used on the guide tube face. Oil rings keep the grease in place and protected from contamination. This barrier of grease will not only protect the release bearing but also the guide tube itself. It’ll also minimise clutch release bearing rattle, a common problem that gives a loud rattling noise on idle which is cause by a lack of grease and poor design tolerances. Having looked at every aspect of the clutch release bearing there is only one more issue to resolve and the ULTRAspec Release Bearing addresses this with absolute uncompromised logic. Historically the Land Rover Release Bearing has been attached to the fork via a very poor and quite pathetic plastic staple. Anyone who’s ever fitted a clutch fork knows that this plastic staple isn’t fit for purpose. They break, bend, melt and fall out. They were a last after thought but managed to be kept in production all the way from the early 70’s when they were introduced. For our ULTRAspec Release Bearing we’ve designed a new clip from scratch, a clip that wont fall off, will keep the bearing and fork in place and will last. Our clip fits around the fork and is clipped to the bearing on both sides, not just one. You’ll not get any bearing rattle on idle and fitting will be easier. It is the Ultimate solution to finish off the Ultimate Release Bearing. We’re so confident and sure that the ULTRAspec Release Bearing is that strong and reliable we offer it with a LIFETIME Warranty, which means you have piece of mind. The warranty covers the carrier and the bearing.
  • Land Rover Defender Brand New Bracket Check Arm Front LH MWC5019 manufactured in the UK to the highest standard Brand New Bracket Check Arm Front LH MWC5019 and powder coated in black. Genuine check arms are prone to root or rust so replace with quality.
  • Land Rover Defender Brand New Bracket Check Arm Front LH & RH MWC5019 - MWC5018 manufactured in the UK to the highest standard Brand New Bracket Check Arms Front LH & RH MWC5019 - MWC5018 are powder coated in black. Genuine check arms are prone to root or rust so replace with quality.
  • Land Rover Defender Brand New Bracket Check Arm Front RH MWC5018 manufactured in the UK to the highest standard Brand New Bracket Check Arm Front RH MWC5018 and powder coated in black. Genuine check arms are prone to root or rust so replace with quality.
  • Land rover Defender Slave Cylinder Adapter TDCI advised to change when fitting new clutch like the HD syncro or clutch fix HD range OEM NUMBER LR068982G
  • Land Rover defender discovery INTRAspec TDI 200/300tdi

    Land Rover defender discovery INTRAspec TDI 200/300tdi is designed specifically for your Daily road going truck. If you do a bit of towing now and then, perhaps some light green laning or just use your truck as your commuter then the INTRAspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little extra poke than standard!

    Description

    INTRAspec TDI
    • S-HDTF Friction Material
    • High Torque Sprung Centre Hub
    • High Quality NSK Release Bearing
    • G90 High Temp Assembly Grease
  • Land Rover defender discovery INTRAspec TD5 for Dual Mass designed specifically for your Daily road going truck. If you do a bit of towing now and then, perhaps some light green laning or just use your truck as your commuter then the INTRAspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little extra poke than standard!

    Description

    INTRAspec TD5 for DMF
    • S-HDTF Friction Material
    • Billet Machined Centre Hub
    • High Quality NSK Release Bearing
    • G90 High Temp Assembly Grease
  • Land Rover Defender Discovery DURAspec TDI 200/300tdi

    Land Rover Defender Discovery DURAspec TDI 200/300tdi is the next stage up, ideal if you use your Land Rover as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and driveability from your mapped motor the DURAspec will keep you moving forward!

    Description

    DURAspec TDI
    • S-HDTF Friction Material
    • High Torque Sprung Centre Hub
    • Syncro Clutches ULTRAspec Release Bearing
    • G90 High Temp Assembly Grease
    • High Tensile Cap Head Bolt Pack for Clutch Cover
  • Land Rover defender discovery DURAspec TD5 for Dual Mass is the next stage up, ideal if you use your Land Rover as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and driveability from your mapped motor the DURAspec will keep you moving forward!

    Description

    DURAspec TD5 for DMF
    • S-HDTF Friction Material
    • Billet Machined Centre Hub
    • Syncro Clutches ULTRAspec Release Bearing
    • G90 High Temp Assembly Grease
    • Clutch Cover Fasteners Kit