Wheels

  • COVER-WHEEL CAP CODE - LR069900LR
  • Code: DA1350
    Black
    Made in the UK exclusive for Bowler, these lightweight, high strength wheels are TUV tested and are used in the Defender Challenge. They are 7.5" wide and will accept tyres ranging from 235 - 265 wide (including the standard 16" Land Rover options of Continental Cross Contacts or Goodyear MTR). Maximum load rating 1,250kg.
  • Out of stock
    THIS 4 PIECE KIT WILL FIT ALL DEFENDER VEHICLES AND IS PERFECT FOR OFF-ROAD VEHICLES - THESE EXTENDED ARCHES ARE 50mm AND ARE TOP QUALITY. THEY INSTANTLY CHANGE THE APPEARANCE OF THE DEFENDER. comes complete with fixing clips and seals to fit to vehicle
  • Defender alloy wheel Calibre SVX gunmetal polished 16" is a brand new alloy wheel for Land Rover Defenders - The NEW Boost design, featuring 5 detailed, Gunmetal and polished spokes arching out purposefully to the rim. In the increasingly popular Land Rover Defender 90 and 110, this is set to enhance the look of many vehicle this year, giving a street look. ET25 1025Kg Max Load 16 x 7.5" Rim No centre caps with logos are sold with these wheels Important Information Before Fitting: Wheels are correct stud fitting for the vehicle and any relevant fasteners or locating rings and are correct in relation to both wheel and vehicle. Check wheel on vehicle to ensure it clears brake and suspension parts and rotates freely on both front and rear hubs. Carry out a 'lock-to-lock' check to ensure full bodywork clearance. Note: No wheels will be accepted for credit after having tyres fitted.
  • BOOST ALLOY WHEEL Code: RRC503400MNH 16" x 7 Silver Defender - 1994 onwards Smarten up your Land Rover with a smart new set of alloy wheels. Note - Centre caps and wheel nuts not included with wheels. It is the responsibility of the vehicle owner to ensure that the wheels fitted to their vehicle have an appropriate load rating. The minimum required load rating can be determined by taking the manufacturers recommended maximum axle weight and dividing by two.
  • 'SPECTRE' WHEEL ARCHES Code: DA1348 Looking for that Spectre Defender look? Or maybe that wider stance on your Defender? well we have just the answer to that with our ABS Plastic  extended arch kit. Manufactured here in the U.K. • Made from ABS plastic Made here in the U.K. • Tough plastic
  • The Defend 1948 wheel is a pared back mechanical design with 5-way symmetry. The V-shaped spokes create the alternate linear and flared spacing which is a Kahn hallmark. Designed specifically for Land Rover vehicles, the wheel follows the same iconic design language, placing function on an equal footing with form. A centre cap is not supplied with this wheel. The Defend 1948 alloy wheels are designed to accommodate your original cap. If you require them, we ca The Defend 1948 wheel is a pared back mechanical design with 5-way symmetry. The V-shaped spokes create the alternate linear and flared spacing - a Kahn hallmark. Designed specifically for Land Rover vehicles, the wheel follows the same iconic design language, placing function on an equal footing with form. A centre cap is not supplied with this wheel. The Defend 1948 alloy wheels are designed to accommodate your original cap. If required, we can supply you original caps at additional cost. WHEEL SPECIFICATION Size : 8" x 16" Finish : Satin Black Material : Aluminium Classic look different to others on market These wheels are not designed for off-road use n supply you original caps at additional cost. WHEEL SPECIFICATION Size : 8" x 16" Finish : Satin Black Material : Aluminium Classic look different to others on market These wheels are not designed for off-road use
  • Land Rover Defender Alloy Wheel Nut Black Capped x20 - RRD500560B, A set of 20 black alloy wheel nuts with integral washer. These are 27mm nuts with a 16mm thread. Perfect to go with a set of black alloy wheels. Quality replacement parts, equivalent to Land Rover part number: RRD500560 supersedes ANR2763MMM Suitable for the following models: Land Rover: Defender, All Models Land Rover: Discovery 1, All Models, 1989-1998 Land Rover: Range Rover Classic, All Models, 1986-1994
  • Modernise the look of your defender with one of the most stunning-looking wheels on the market for the Defender. These are finished in gloss black. We also have black wheel nuts and wheel spacers, if needed. PRICE SHOWN IS FOR A COMPLETE SET OF 5 WHEELS.

    Product Details 

    PRODUCT TYPE ALLOY WHEEL
    COLOUR BLACK
    WHEEL SIZE 16"
    WHEEL WIDTH 7"
    WHEEL LOAD RATING 1350
    OFFSET 20
    PCD 5/165
     
  • Land Rover Defender Wheel Spacers 30mm Black made by Optimill wheel spacers. 30mm hub centric wheel spacers manufactured from billet aluminium. Fits all Land rover Defender models. Comes as a set of 4 with OEM Land rover studs pressed into the back. Spacers are used to give a wider stance and to give the vehicle more lock when wider wheels have been fitted, as the tyres rub and need more clearance.
    • Manufactured in UK
    • Andosdised in black
    • Comes with Nuts
    • Set of 4
    • 30mm wide
    • Hub Centric
  • Optimill wheel spacers. 30mm hub centric wheel spacers manufactured from billet aluminium. Fits all Land rover Defender models. Comes as a set of 4 with OEM Land rover studs pressed into the back. Spacers are used to give a wider stance and to give the vehicle more lock when wider wheels have been fitted, as the tyres rub and need more clearance.
  • MOMO 36 SPLINE BOSS Code: DA5734 slimline boss, measuring only 32mm in depth. Made from single billet aluminium, black anodized, this 36 spline boss also fits all 2015 models. ? Please note the momo horn button will no longer fit due to this being so slim. ?The boss is supplied with screws and pins to cancel the indicators, you do not need to use the pins on 2015 models.
  • OLD MAN EMU - STEERING DAMPER Code: DA8925 Defender Steering dampers with nitrogen charged foam cell for reduced wheel vibration and improved handling and control. Features > Massive 35mm bore. > 9 stage valving for optimum performance. > Stone guard. > Fits original mounts. > 50/50 valving.
  • RAC830 12V Rapid Digital Tyre Inflator • Rapid inflation: Twin piston function allows rapid inflation of SUV, 4x4 and standard car tyres • Time saving: 2 minute inflation for car tyres* 5 minute inflation for 4 x 4 tyres** • Precise control : Preset digital gauge allows you to set the required pressure by simply rotating the dial • Large display: Makes it easier to read the blue back lit gauge day or night • Night time illumination: The white light helps you to inflate your tyre on the roadside • Pressure settings: Choose the pressure measurement for your vehicle from PSI, KPA, BAR • Accidental over inflation: Use the deflation valve to release extra pressure  Inflate: Sports balls and small inflatables can be inflated with the 3 adaptors supplied • Simple connection: Flexible air hose and durable brass screw valve connector • Fits in boot: Handy storage case Specifications Suitable for Contents Voltage  12v Max amperage 15 amp Wattage 180w Max pressure 100psi Air compressor flow rate 45-48L/ Min Air line length 85cm Product size L 120 x W 258 x H 170 mm Pack size L 127 x W 303 x H 190 mm Power cable 3.5m Pack weight 2.88Kg Barcode 5055175236629 Case qty 3 x 1 *Approx based on inflating a tyre to 35psi **Approx based on inflating a 22” to 40psi