-
-
OLD MAN EMU HANDLING KIT Code: DA2861 Medium-duty full kit Defender 110 > Fully integrated Old Man Emu handling kits for all ride types > Designed and tested by a team of specialist engineers in Australia > Superior performance across all terrain > Dramatically improved high and low speed control for increased comfort Any suspension modification should have a full wheel alignment to ensure the vehicle is set Note - Kit lifts Defender from standard height to between 1" & 2" dependent on kit fitted (winch etc) -
OLD MAN EMU HANDLING KIT Code: DA1740 Medium-duty full kit Defender 90 > Fully integrated Old Man Emu handling kits for all ride types > Designed and tested by a team of specialist engineers in Australia > Superior performance across all terrain > Dramatically improved high and low speed control for increased comfort Any suspension modification should have a full wheel alignment to ensure the vehicle is set Note - Kit lifts Defender from standard height to between 1" & 2" dependent on kit fitted (winch etc) -
SHOCK ABSORBER & SPRING KIT Code: DA4287C Cellular Dynamic Heavy-duty 40mm lift Defender 110 Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for! Kit contents > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair Shock Absorbers The Britpart Cellular Dynamic Shock Absorber represents a significant advance in Land Rover suspension systems.It features a cellular foam insert instead of a normal nitrogen gas or air, this is to stop the oil from boiling. The foam takes up less room which means more room for oil, 50% more, which offers maximum heat dispersion. This heat dispersion translates to a very subtle but controlled ride that will not fade no matter how hard you push them. They are ideal for a driver who needs more control to complement performance improvements or to enhance a standard vehicle. The unique design ensures ride comfort and cornering ability is maximised and of course they are superb off-road. > Cellular technology tube > Sintered 18mm rod > Reinforced welded mounts > Polyurethane bush > Single piece eye ring > Heavy-duty powder coating Coil Springs Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
SHOCK ABSORBER & SPRING KIT Code: DA4287 Super Gaz Heavy-duty 40mm lift Defender 110 Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for! Kit contents > Springs - front & rear - pair > Britpart Super Gaz Shock Absorbers - front & rear - pair Shock Absorbers Britpart Super Gaz Shock Absorbers offer a 35mm bore tube filled with Fuchs shock absorber fluid, using the best seal available, single piece eye rings, polyurethane bush mounts and a very durable powder coated finish. These offer a vast improvement in ride quality and damping performance. Coil Springs Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases. -
SHOCK ABSORBER & SPRING KIT Code: DA4286HD Super Gaz Heavy-duty 40mm lift Defender 90 Discovery 1 Range Rover Classic Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for! Kit contents > Springs - front & rear - pair > Britpart Super Gaz Shock Absorbers - front & rear - pair Shock Absorbers Britpart Super Gaz Shock Absorbers offer a 35mm bore tube filled with Fuchs shock absorber fluid, using the best seal available, single piece eye rings, polyurethane bush mounts and a very durable powder coated finish. These offer a vast improvement in ride quality and damping performance. Coil Springs Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs. Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading. As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
-
-
-
-
3-DEGREE HEAVY-DUTY RADIUS ARMS Code: DA5506 Wide / 45mm Defender Discovery 1 Range Rover Classic Help contribute to a much better off-road capability > Designed for vehicles with an extended 1 to 3” lift. > Front radius arms correct castor alignment which in turn ensures safe driving. > Rear radius arms provide full rear axle articulation. > Fitting the radius arms will contribute to much better off-road capability for your vehicle by fully utilising your spring and shock absorber set. > Zinc passivated with a heavy-duty powder coating finish to complement each component and the Britpart coil springs. Use with NTC6781 & DA2353 bushes -
OLD MAN EMU COIL SPRINGS Code: DA8923 Rear Lift - Up to 55mm Defender - 110 Defender - 130 Spring rate - 420lbf/in / 74N/mm Free height - 435mm Defender - 110. Load - 500kgs Defender - 130. Load - 400kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. -
OLD MAN EMU COIL SPRINGS D110 Code: DA6841 Rear Lift - Up to 40mm Defender 110 - Station Wagon Spring rate - 175/200lbf/in / 31/35N/mm Free height - 440mm Defender - 110. Load - Station Wagon > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU COIL SPRINGS Code: DA8922 Rear Lift - Up to 50mm Defender - 110 Defender - 130 Spring rate - 300lbf/in / 52N/mm Free height - 435mm Defender - 110. Load - 300kgs Defender - 130. Load - light load > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution - Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. Important DA8922 has reduced spring rate from OE to provide improved ride quality for light loads -
OLD MAN EMU COIL SPRINGS Code: DA8910 Front Lift - Up to 40mm Defender - 90, 110 & 130 - diesel Defender - 90, 110 - petrol Discovery 1 - diesel Range Rover Classic - diesel Spring rate - 225lbf/in / 39N/mm Free height - 390mm Defender - 90, 110 & 130 - diesel. Load - 50kgs Defender - 90, 110 - petrol. Load - 51 - 110kgs Discovery 1 - diesel. Load 50kgs Range Rover Classic - diesel. Load - 50kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU COIL SPRINGS Code: DA8924 Front Lift - Up to 40mm Defender - 90 - diesel Discovery 1 Range Rover Classic Spring rate - 285lbf/in / 50N/mm Free height - 385mm Load - 51 - 110kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU SHOCK ABSORBER Code: DA8913 REAR PAIR Defender - 90 & 110 - heavy-duty Defender - 130 Discovery 1 - heavy-duty Range Rover Classic - heavy-duty Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mount Kit - DA6806
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
