• Full set of wheel nuts
    • Discovery 2

    Protect your valuable wheels and tyres from theft!

    Kit contains - > 5 x locking nuts 5 x spare caps 18 x normal nuts (inc caps) 1 x key 1 x remover tool
  • Code: DA2603CF
    Carbon fibre effect finish facia plate Suitable for right & left hand drive models
    • Defender - 2007 onwards

    Neat storage solution.

    This glove box is for the new Defender which utilises the available dashboard space. Ideal for storing all the usual small items you carry with you. Robust construction and easy to fit with all the necessary parts supplied.
  • Code: DA4629B
    Black
    • Defender - except sunroof equipped models

    Designed with CAD software.

    > Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification.
  • Code: DA4629
    Grey
    • Defender - except sunroof equipped models

    Designed with CAD software.

    > Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification.
  • Code: DA6641
    280 pieces.
    Box of assorted popular trim clips and fixings commonly used on Land Rovers. Supplied in a handy presentation box. Contents 35 x Rivet - AFU1075 15 x Trim fastener - ANR2224 15 x Scrivet - DYQ100230 15 x Scrivet - AWR3994 15 x Scrivet - DYQ100320 25 x Finisher clip - DYC101420 20 x Stud door casing - MWC9134 20 x Stud door casing - blue - MWC9134BLUE 20 x Fastener - MXC1800 60 x Snapsac - MWC3136 25 x Door casing stud - DKP5279L 15 x Fir tree roof insulation retainer - DA1634
  • Code: DA4599
    Solves the problem of that crude and annoying blast of hot air to your lower legs.
    • Defender - 2007 onwards
    The MUD Heater Deflector solves the problem of that crude and annoying blast of hot air to your lower legs in all Puma engine Defenders. The Heater Deflector redirects the flow of air from the lower heater outlets forwards into the footwell, rather than directly at your legs to create a more comfortable driving environment. The Heater Deflector moulding fixes easily in place using the supplied push-fit fasteners and can be fitted in 5-minutes. All you need is a 4.5mm drill. Position the Heater Deflector, drill the fixing holes in the lower dash section and fix the Heater Deflector in place using the push-fit fasteners.
  • Code: DA8092
    Bonnet
    • Defender - 2007 onwards

    Use it on your doors, floor, roof, bonnet and loadspace.

    Dynamat Xtreme is the highest efficiency sound deadening material available and the most effective product for stopping noise and vibration. Dynamat Xtreme can be used on any and all interior sheet metal and fibreglass body panels. The aluminium constraining layer is very moldable and conforms easily to all interior surfaces. The patented extra sticky butyl layer is formulated with VECTOR chemistry for the most amazing energy conversion capabilities ever. Use it on your doors, floor, roof, bonnet and loadspace for a quiet, cool and incredibly solid ride. > Create a solid, luxury car feel with a reduction in road noise. Stop resonance & vibrations, reduces buzzes & rattles. Improved sound. Get more bass. Hear more of your music. For use throughout your vehicle interior, the first step to an improved Land Rover. Britpart is the official Dynamat wholesaler in the Land Rover aftermarket.
  • Code: DA5735
    • Defender - up to FA
  • Enhance your Defender's appearance!

    Made from GRP (glass-reinforced plastic AKA fibreglass) this Defender Puma bonnet is half the weight of the original Land Rover bonnets. The bonnet has return edges on all four sides underneath for strength and to make it more rigid. It has strengthened hinge points and is supplied with stainless steel hinge-bolts & screws.
    Code: DA1963
    White
    • Defender 90 - 1984 onwards
    • Defender 110 - 1983 onwards
  • Code: DA1203
    • Defender - 2002 onwards

    Does your Defender's rear door sometimes close on you unexpectedly?

    This neat and easily installed gas strut kit will solve that problem and replaces the original door stopper. The gas strut will hold the door in place when open - even with a spare wheel in place - and will assist in the opening of the rear door too with a smoother and more controlled movement. Complete with fittings and instructions.
  • No drilling required for fitment.

    The Britpart wind deflectors will reduce buffeting and wind noise when driving with the window open. Custom designed for each vehicle and easily attached - no drilling required for fitment!
    Code: DA6078
    Front 2 piece kit
    • Defender
    • Series
  • Satin black finish Pair
    • Defender

    Add some heavy-duty protection to your Land Rover!

  • Code: DA4049S
    Painted silver finish Pair
    • Defender

    Add some heavy-duty protection to your Land Rover!

  • Code: DA4100B
    Pair Satin black finish
    • Defender 110

    Add some heavy-duty protection to your Land Rover!

  • Code: DA4071B
    Pair Satin black finish
    • Defender 110

    Add some heavy-duty protection to your Land Rover!

  • Code: DA4100
    Pair Natural aluminium finish
    • Defender 110

    Add some heavy-duty protection to your Land Rover!