Exterior
-
2" LIFT REAR RADIUS ARM Code: DA5510 Defender Discovery 1 Range Rover Classic Help contribute to a much better off-road capability > Designed for vehicles with an extended 1 to 3” lift. > Front radius arms correct castor alignment which in turn ensures safe driving. > Rear radius arms provide full rear axle articulation. > Fitting the radius arms will contribute to much better off-road capability for your vehicle by fully utilising your spring and shock absorber set. > Zinc passivated with a heavy-duty powder coating finish to complement each component and the Britpart coil springs. -
3-DEGREE HEAVY-DUTY RADIUS ARMS Code: DA5506 Wide / 45mm Defender Discovery 1 Range Rover Classic Help contribute to a much better off-road capability > Designed for vehicles with an extended 1 to 3” lift. > Front radius arms correct castor alignment which in turn ensures safe driving. > Rear radius arms provide full rear axle articulation. > Fitting the radius arms will contribute to much better off-road capability for your vehicle by fully utilising your spring and shock absorber set. > Zinc passivated with a heavy-duty powder coating finish to complement each component and the Britpart coil springs. Use with NTC6781 & DA2353 bushes -
Made from 1st Class HDPE and with a design in the shape of a funnel our Oil Drainage Container helps to collect the waste directly into the closable can, eliminating mess in your garage or workshop. Featured on the container are the three separate openings which aid in the filling and disposing of the waste. Use horizontally to fill from sump or drain plug and then store vertically. When emptying, open the large cap and use the vent plug to allow easy pouring. The Oil Drainage Container will make your oil change spill and fuss free, creating less mess than an open oil tray. Specifications: Height 11cm x Width 30cm x Depth 50cm Weight 1.8kg -
-
Alu-Cab Shadow Awning LHS Alu Cab Code : ALCAWN-LHS Like all Alu-Cab products, our 270° Shadow Awning, is built tough! Built in the stormy Cape, this awning is designed to stand up to strong winds and inclement weather. And with its aluminium-coated canvas it’s equally good at providing the coolest shade in desert climes. But one of the most popular features of the awning is the ease with which it’s opened and closed, which is easily a one person operation. The unit has four arms, each containing a tie-down strap for really serious weather (a peg bag & pegs are also supplied); one leg has a drop down pole for breezy conditions but in fine weather you can get by without deploying it. So while our Shadow Awning is built tough, it’s also built easy, designed to make your camping experience as comfortable and as effortless as possible. Shade area: 10m2 Construction: Aluminium Fabric: Imported reflective material Fitment Brackets: Various options available, attaching to strong roof rack or load bars Orientation: LHS is standard, RHS available on request -
ARB ALUMINIUM ENCASED AWNING & LED LIGHT KIT Code: 814102 2,500 x 2,500mm Complementing the design and sophistication of modern 4WDs, ARB’s aluminium encased awning offers a sleek and contemporary alternative to traditional awning covers while adding improved functionality. The three quick release bungee cords remove the need for zips while the flip-up lid provides unmatched simplicity. An added abrasion resistant material improves the protection of our proven 300gsm, PU coated, fully waterproofed and UV protected canvas while stowed and travelling. The awning is supported by heavy duty 1.2mm gauge x 25mm diameter expandable aluminium poles, anodised for greater corrosion resistance and perfect for setting up by the beach. > Aluminium housing offers strength and modern styling > Quick release bungee cords on a hinged lid for unmatched simplicity > Anodised aluminium for corrosion resistance, perfect for the beach > PU coated canvas provides a 100% waterproof overhead shelter > Ripstop canvas, a cross-hatched design, improves strength > Heavy-duty poles for greater resistance to poor weather conditions > Compatible with awning rooms, wind breaks and mesh multi-mat You may also need - > ARB Quick release awning brackets - Kit 1, 3, 4 & 5 > ARB Awning brackets - 813402 or 81340 -
ARB AWING ROOM WITH FLOOR Code: DA6832 2,500 x 2,100mm Designed to function as a fully enclosed room, the awning with floor provides additional weather protection and privacy. The awning room can be used with ARB awnings and features a durable floor, two large mesh windows with roll up blinds and a zippered door with both solid and mesh panels. It is fully enclosed with an integrated roof that hangs just below the main awning canvas. Rear wall features a central door that can be used to directly access the vehicle rear door or canopy depending on awning mounting position. Access points for 12v/240v power leads. Supplied with hardened steel pegs and adjustable tension straps. -
ARB DELUXE AWNING ROOM WITH FLOOR Code: DA1466 2,500 x 2,500mm Designed to function as a fully enclosed room or mosquito net, the new ARB deluxe awning room with floor provides protection from the weather, insects and provides additional privacy. Easy and quick to set up the ARB deluxe awning room can be used with 2500 and 2000 model awnings and features a durable waterproof floor and its own separate ceiling to help keep you cooler. All main wall panels incorporate zipper operated two way solid and mesh access doors for easy access and to accommodate changing weather conditions. Vehicle wall is solid zipper wall only. Note - Kit does not include the awning. > Keep dry with waterproof walls made from Oxford Polyester > Long product life and sun protection thanks to UV treated materials > Enjoy a ‘bug-free’ environment with ultra-fine insect mesh > Heavy duty yet lightweight waterproof floor means a dry ground and compact storage > Organiser pockets perfect for phones, magazines and sunblock > Comes complete with guy ropes and steel pegs > Cable access ports for high mounted lighting solutions -
-
Land Rover Defender Bonnet security Hinges black or silver ,Stylish looking but essential to stop the thieves stealing the bonnet that can cost you a lot of money to replace. Easy to fit and comes with the security bit for the screw.- Black Or Silver
- Aluminium billeted
- Comes with fixings
- Security bit comes with kit
- Easy to fit
-
-
-
EXPEDITION ROOF RACK Code: DA3070 2.75m long x 1.50m wide Defender 110 Extremely strong, versatile and easy to use These Defender roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile and easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. > 4 feet per side > Weight - 38kgs > Vehicle gutter to top of rack - 265mm -
BRITPART EXPEDITION ROOF RACK Code: DA3072 2,050mm L x 1,500mm W Vehicle gutter to top of rack - 265mm 3 feet per side 32kg Defender 90 Extremely strong, versatile and easy to use These roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile, with a low profile and are easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. -
BRITPART EXPEDITION ROOF RACK Code: DA3269 1.60m long x 1.50m wide Defender 110 Double cab pickup Defender 130 Double cab pickup Extremely strong, versatile and easy to use These Defender roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile and easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. > 3 feet per side > Weight - 27kgs > Vehicle gutter to top of rack - 265mm -
-
-
-
New LH rear body corner capping which fits all 90/110 Defender models from 1994 onwards. Body corner capping ALR9103 is supplied in black powder coat manufactured in the UK. For other side or a pair please see other listings Previous part numbers ALR9103 AQL710030 AQL710031 AQL710250 -
New RH & LH rear body corner capping which fits all 90/110 Defender models from 1994 onwards. Body corner capping ALR9104 & ALR9103 is supplied in black powder coat manufactured in the UK. For other side or a pair please see other listings. Previous part numbers ALR9104 AQL710020 AQL710021 AQL710240 ALR9103 AQL710030 AQL710031 AQL710250 -
New RH rear body corner capping which fits all 90/110 Defender models from 1994 onwards. Body corner capping ALR9104 is supplied in black powder coat manufactured in the UK. For other side or a pair please see other listings. Previous part numbers ALR9104 AQL710020 AQL710021 AQL710240
-
-
COVER-WHEEL CAP CODE - LR069900LR -
Code: DA1072Metal - chrome finish Single- Range Rover L322
- Range Rover Sport - Mk1
Enhance your Range Rover's appearance!
-
Enhance your Defender's appearance!
Made from GRP (glass-reinforced plastic AKA fibreglass) this Defender Puma bonnet is half the weight of the original Land Rover bonnets. The bonnet has return edges on all four sides underneath for strength and to make it more rigid. It has strengthened hinge points and is supplied with stainless steel hinge-bolts & screws.Code: DA1963White- Defender 90 - 1984 onwards
- Defender 110 - 1983 onwards
-
Code: DA2067Single Natural aluminium finish- Defender - without wiper
- Series - without wiper
Add some heavy-duty protection to your Land Rover!
-
Code: DA2068Single Natural aluminium finish- Defender - with wiper - late
Add some heavy-duty protection to your Land Rover!
-
Code: DA2250BElectroplate finish- Defender
- Discovery 1
- Range Rover Classic
Give your vehicle some extra protection with a diff guard.
This guard is simple to fit (no drilling) and has the added advantage of having the fill plugs accessible at all times. -
Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material.
Pioneered in Australia in the early 1980’s, Safari Snorkels were born out of a need to protect 4WD engines from the hazards of dust and water commonly encountered in touring and off road applications. Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability. In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust. Note - Fitment from seated internal view. -
-
-
Satin black finish Pair- Defender
Add some heavy-duty protection to your Land Rover!
-
Code: DA4049SPainted silver finish Pair- Defender
Add some heavy-duty protection to your Land Rover!
-
Code: DA4071Pair Natural aluminium finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4071BPair Satin black finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4100Pair Natural aluminium finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4100BPair Satin black finish- Defender 110
Add some heavy-duty protection to your Land Rover!
-
Code: DA4715Long luggage rail Roll cage mount 2.8m x 1.4m / 40kgs- Defender 110 - hard top & station wagon
4 roof cross rails as standard and can accommodate 3 additional roof cross rails. Long luggage rail with rain gutter mount, ideal for front or back loaded tents. Refer to owners handbook for recommended maximum weight.Heavy-duty steel roof rack.
> The standard pack includes a steel roof rack, fixing bolts and optional roof cross rails. > Roof racks are grit blasted, primed with a zinc enriched powder undercoat, and finished with a durable black powder coat. > Not compatible with a sunroof. > Tents can normally be affixed to the roof rack without a floor, although a marine ply non-slip floor is also available. > Additional roof cross rails are available to purchase for use without a roof rack for use as, for example, a roof bar, basic tent support, attaching a roof storage box or to spread additional load on the Safety Devices' roof racks. -
No drilling required for fitment.
The Britpart wind deflectors will reduce buffeting and wind noise when driving with the window open. Custom designed for each vehicle and easily attached - no drilling required for fitment!Code: DA6078Front 2 piece kit- Defender
- Series
-
Enhance your Defender's look with a pair of these smart and robust side protectors. -
LED side repeaters Code: DA8531 Smoked LED side repeaters Sold as a pair For LR Defender - Td5 onwards -
Defender 110 ‘Fire and Ice’ style ‘Ebony and Ivory’ side steps, These chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Protect your sills with these Defender 110 Tube Rock Sliders made from 76mm x 3.2mm Tube, Galvanised and powder-coated in textured Black. Made in the UK to a very high standard, Comes with all fixings. -
Defender 110 Crew Cab/side steps with chequer tread plate. These chunky sidesteps not only look great with an attractive checkerplate tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 110 crewcab also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land Rover.- QuickTread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive checkerplate tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included.
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 10-15 minutes per side*
- All Defender side steps have the option for zinc coating under the black powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Defender 110 (1985 onwards) chunky XS style side steps Available in Black chequer Tread plate or Silver Tread plate, select option when proceeding to checkout, For Piano style please see other listings. Also available in 90/110/130 These chunky XS sidesteps not only look great powder coated and topped with an attractive checker plate tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover.- Quick Tread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive checkerplate tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 5-10 minutes per side*
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Defender 110 sill chequer plate 3 door made by the same supplier as land rover. these come with the gaskets and fixing kits, The 3M Chequer plate with the 5 bar pattern is to a high quality. -
Defender 110 sill chequer plate 5 door made by the same supplier as land rover. these come with the gaskets and fixing kits, The 3M Chequer plate with the 5 bar pattern is to a high quality. -
Defender 90 rear quarters chequer plate, Very high quality 3mm thick made by the OEM manufacturer and comes with all the fixings and the Foam gaskets.