Exterior

  • A pack of 10 8mm black plastic, expanding rivets suitable for attaching the sill protectors on Land Rover Discovery Series 1 models. These rivets are also used for various other applications on other Land Rover models and may also be suitable for other makes of car. Applicable Models: Defender 1987>, 90/110. Discovery 1989 - 98 and 1998 - 04. Freelander 1996>. Range Rover Classic 1992 - 94. Range Rover P38 1995>. The Quality replacement parts, equivalent to Land Rover part number: 79086L To fit rivet snap of centre pin and push through main body.
  • AFU1075 Wheel arch clip, these are 6mm plastic trim clips a perfect replacement for the land rover clips used to attach the plastic wheel arch surround or spat on the defender (1987 - 2006 ). The centre pin of the plastic clip is pushed through and expands to hold the fastener in place and keep the spat secure The clip is high quality alternative to the Land Rover original part. Land Rover Defender 90/110 (1987 - 2006 ) PACK OF 10
  • Aluminium fuel cap to fit to TD5 & TDCI defenders. Comes complete with lock and key. Direct replacement for original using genuine locking mechanism. Available in various colours.
  • Aluminium fuel cap to fit to TD5 & TDCI defenders. Comes complete with lock and key. Direct replacement for original using genuine locking mechanism. Available in various colours.
  • New LH rear body corner capping which fits all 90/110 Defender models from 1994 onwards. Body corner capping ALR9103 is supplied in black powder coat manufactured in the UK. For other side or a pair please see other listings Previous part numbers ALR9103 AQL710030 AQL710031 AQL710250
  • New RH rear body corner capping which fits all 90/110 Defender models from 1994 onwards. Body corner capping ALR9104 is supplied in black powder coat manufactured in the UK. For other side or a pair please see other listings. Previous part numbers ALR9104 AQL710020 AQL710021 AQL710240
  • New RH & LH rear body corner capping which fits all 90/110 Defender models from 1994 onwards. Body corner capping ALR9104 & ALR9103 is supplied in black powder coat manufactured in the UK. For other side or a pair please see other listings. Previous part numbers ALR9104 AQL710020 AQL710021 AQL710240 ALR9103 AQL710030 AQL710031 AQL710250
  • Designed and developed by Croytec specifically for the Defender where the windscreen attaches the bulkhead. These will fit all models of 90/110/130 easy to fit, they are a direct replacement of the original blocks. The blocks are a high quality machined assembly and are anodised to aerospace specification for maximum corrosion prevention. if you Require different colours please email us to check availability and prices. For other Croytec items please check other listings.
  • The Croytec Wing Trims are a new addition to our exterior range of components. The wing Trims are machined from Billet Aluminium and are anodized for maximum corrosion resistance. They will fit all models after 1999 with the oval indicator fitted to the wing. We have machined a louvered detail into the trims to give them a quality refinement to your vehicle. The trims have a super strong 3M self adhesive backing and are easily fitted, simply degrease the surface of the wing, peel of the backing and stick into place. Our standard finish is silver but the Wing Trims are available in different anodised colours through our Special Order Service, the wing trims are blank, but can be laser etched on the flat surface as a special order, see our special order page for more details.
  • Originally Designed for the WOLF military vehicles Fits All Standard Spec Defenders With Alloys Wheels With Our Own Alloy Wheel Extension Bolts Included In The Price. The unique patented piston carrier allows the same swinging action to open the back door while still attached to the spare wheel carrier. All the weight of the spare wheel is taken off the back door by the spare wheel carrier, mounted onto the chassis.It is important you make sure the back door of the Defender has not been modified or changed Fits All Model Year Defender 90, 110's Includes all fixings required. This is the Genuine Land Rover version of the Mantec carrier and has "Land Rover" on the carrier itself Brand New Part No. VPLDR0130 Below is a list of what model specs it will fit. Defender 90 "Puma" Defender 90 300TDi Defender 90 TD5 Defender 110 Utility Defender 110 300TDi Defender 110 TD5 Defender Normally Aspirated Defender V8 engine
  • The Defend 1948 wheel is a pared back mechanical design with 5-way symmetry. The V-shaped spokes create the alternate linear and flared spacing which is a Kahn hallmark. Designed specifically for Land Rover vehicles, the wheel follows the same iconic design language, placing function on an equal footing with form. A centre cap is not supplied with this wheel. The Defend 1948 alloy wheels are designed to accommodate your original cap. If you require them, we ca The Defend 1948 wheel is a pared back mechanical design with 5-way symmetry. The V-shaped spokes create the alternate linear and flared spacing - a Kahn hallmark. Designed specifically for Land Rover vehicles, the wheel follows the same iconic design language, placing function on an equal footing with form. A centre cap is not supplied with this wheel. The Defend 1948 alloy wheels are designed to accommodate your original cap. If required, we can supply you original caps at additional cost. WHEEL SPECIFICATION Size : 8" x 16" Finish : Satin Black Material : Aluminium Classic look different to others on market These wheels are not designed for off-road use n supply you original caps at additional cost. WHEEL SPECIFICATION Size : 8" x 16" Finish : Satin Black Material : Aluminium Classic look different to others on market These wheels are not designed for off-road use
  • Lightweight Aluminium Bumper for Defender made from 4mm Aluminium and powder coated Silver, With Daytime Running Lights.
  • 10 Litre Wavian Jerry Can Holder
    Metal holder for 10 Litre Jerry Can The classic NATO Jerry Can Holder. Our robust metal holder will help you secure this product to your vehicle or elsewhere. Color: Powder coated black Weight: 2.2 kgs Height 30cm, Width 18cm Depth 36cm
  • Metal holder for 20 Litre Jerry Can The classic NATO Jerry Can Holder. Our robust metal holder will help you secure this product to your vehicle or elsewhere. Color: Powder coated black Weight: 2.2 kgs Height 49cm, Width 18cm Depth 36cm
  • The classic NATO Jerry Can. Our Wavian fuel cans are built to the highest quality, with a number of unique features which set them apart from cheaper alternatives including a more robust construction and a corrosion resistant lining. Features Include: • Powder coated rust-resistant exterior paint • Interior Rezol enamel lining prevents rust • Leak-proof bayonet cap with locking pin Please Note: If you are buying a spout with this can, you will need to buy a separate 5L Spout Clip Adaptor in order to attach it to the handle for storage
  • Code: RBL2303SSSBLACK
    Full external style bar Black
    • Defender 90 - Hard Top with bulkhead, 2-door
    • Defender 90 - Hard Top without bulkhead, 2-door
    • Defender 90 - Station Wagon without bulkhead, 2-door
    • Defender 90 - Station Wagon with bulkhead, 2-door
    • Defender 110 - Hard Top, 2-door
    • Defender 110 - Station Wagon, 4-door
    • Defender 110 - Crew Cab/Double Cab Pick-up, 4-door
    • Defender 130 - Station Wagon, 4-door
    • Defender 130 - High Capacity Crew Cab Double Cab Pick-up, 4-door

    Unrivalled quality...

    Safety Devices are the UK's original designers and manufacturers of roll cages and roof racks for Land Rover. Originally designed for the British Army and the Camel Trophy, today an extensive range of designs are available. The quality is exceptional - cold drawn seamless steel, grit blasted, zinc primed and black powder coated roll cages and roof racks will stand up to the sort of challenges you expect your Land Rover to cope with. Safety Devices offer design excellence, unrivalled quality and a huge choice. Other Safety Devices roll cages are available - ask for details. More information and images can be found at Safety Devices Website