• Land rover Defender anti-rattle-kit-rear-sliding-windows proprietary rubberised window channel replaces the inferior factory felt lining in Land Rover® Defender rear sliding side windows and eliminates the famous glass 'chatter' common in these vehicles. Made from virgin (non-recycled) EPDM rubber for it's superior temperature and weather resistance, our window channel is impervious to ozone, making it fade-resistant. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Inner surfaces are flocked to reduce friction allowing the window glass to slide freely in the channel. This kit is a complete solution, with enough window channel and rivets to restore both your driver and passenger side rear sliding windows. As an added touch, the kit also includes the correct #2 Pozidriv® ACR bit which prevents stripping of the hard-to-find screws that hold the window frame together.
    • 2 x 5-ft Flocked Rubber Extrusions
    • 50 x Sealed POP Rivets
    • 1 x bottle of GooGone®
    • 1 x 3M® Final Stripping Pad
    • 1 x Wooden Width Gauge Disc
    • 1 x #2 Pozidriv® ACR Bit
    • 1 x Full-Color Installation Guide
    FEATURES   
    • Custom designed for Land Rover® Defender rear sliding side windows
    • Tight, stay-put fit
    • Wrap-around design covers aluminium edges
    • EPDM Rubber
    • Flocked inner surfaces

    BENEFITS

    • Cushions glass when closing windows
    • Seals out moisture, dust and drafts
    • Eliminates rattles
    • Fade, tear and temperature resistant
    • Glass slides freely in channel
  • Land Rover Defender Black Window Blocks Aluminium, these windscreen to bulkhead blocks are made from Billet aluminium 6082. Polished and anodised to maximum of 25 microns. Supplied in pairs. Replace the old standard ones to a more modern look and a better quality.
    • Better quality
    • aluminium billet 6082
    • pollished and anodised
    • sold as a pair
  • BOMBPROOF HINGE GUARDS Code: DA1399 4-door kit Defender - all models The hinge guard is built to exact specification and was developed to fit all Defender models and years. It has been engineered for maximum protection and ease of fitment. Each Hinge Guard kit consists of two CAD engineered stainless steel plates which fit inside of each hinge point, restricting outward movement of the door with the bulkhead bolts removed. Fitting the Hinge Guards is incredibly easy with comprehensive fitting instructions supplied. Each door kit can be easily fitted in 20-30 minutes. After installation, only the top of each plate can be seen, providing an unobtrusive modification and deterrent to would-be thieves. Features > Notched upper guard - fits neatly around the dash padding without compromising security. > Custom folds - each plate has a carefully measured, very small offset to allow it to close around the door frame without tearing the door seal. > High-Grade 304 Stainless Steel - 2mm thick: thin enough to fit unobtrusively, more than thick enough to protect your hinges. > Individually profiled - lower and rear hinges profiled for a perfect fit across all variants.
  • this is a new aftermarket product to the range made to a very high quality. These tail gates bet battered when used daily so keep the appearance of your truck back to its original state.
  • Land Rover Defender Front Air con Grill 2007> abs plastic version, If you have the old style grill convert by using this grill. this will give your truck a modern look. We seel this in Gloss black and also supply the lower and main grilles to go with this item.
  • Landrover Defender Front Door Hinges. Designed and manufactured in the UK to outperform others on the market. These are CNC machined from Billets of Aerospace grade 6082-T6 aluminium. The hinge pins are made of stainless steel which are internally pinned to prevent unwanted removal or theft. The hinges also feature self lubricating graphite bushes to reduce friction and prevent wear. After machining and going through our strict quality control procedures these are anodised to a minimum of 30 microns. Supplied with high security stainless fixings & shims.
  • Land Rover Defender Front Gloss Black Door Handles (Pair) These will modernise the look of your out side of the defender by adding that gloss black look. if you already have the gloss black theme going on then these will fit in great.  sold as a pair of handles without the locks.
  • XS BONNET VENTS Code: DA1975 Defender The new XS Enhancement range from Britpart is the perfect way to give your Defender a fresh new look. The front grille, side grille and bonnet vent designs are exclusive to Britpart. Land Rover Defender  wing top air intake set. Hi quality injection moulded in ABS, Gloss Black. Supplied as a pair complete with stainless steel torx head fixing screws. Sports styling, strength, & improved air flow Includes stainless steel woven wire filter mesh Unique multi step louver design provides improved airflow for greater heater efficiency and improved engine bay cooling Quality injection moulded ABS products designed with attention to detail Easy to fit.
  • Wildbear Land Rover Defender Headlamp Guards . Made in the UK, available in Black, Silver and Grey. Manufactured from 4mm plate to provide tough protection from branches and stones, finished with a high quality texture powder coating over zinc treatment for increased durability. These guards not only look great, they really are the part you need to prevent cracked headlight mishaps.
  • Land Rover Defender Heavy Duty Drive Flange TF859, Terrafirma Heavy Duty Drive Flange To fit Defender Models from 1993 original part number RUC105200 FTC859

    These heavy duty drive flanges from Terrafirma are made from superior quality steel compared to the originals with increased spline contact area for additional strength and wear resistance. The flanges fit using the original gaskets and bolts and are gold zinc plated for lasting good looks. They come with a removable dust cap and o-ring seal. This listing is for 1 drive flange. Our Reference: TF5806

    1. HEAVY DUTY
    2. ZINC PLATED
    3. OEM NUMBER FTC859
    4. ALL DEFENDER FROM 1993 >
  • Land Rover Defender high level LED brake light. This is a direct replacement and no modifications needed, so plug and play. ditch your old bulb version to a more modern look. Available in 3 light types: Clear, Red and Light Smoke

    Advantages 

    1. Brighter lights
    2. Better visibility for other drivers
    3. No more Bulbs
    4. Plug and Play
    5. Comes with Gasket
  • Land Rover Defender Light Weight Steering Guard Bolwer Used in the Defender Challenge, the lightweight steering guard will offer protection to steering arms and linkages, but also offers access for maintenance. Available in either Black or Graphite, it uses existing mounting points and both colours come with 2 x red towing eyes for recovery work.
    1. Original Bolwer product
    2. Light weight
    3. Available in Black or Graphite
    4. 2 x Red towing eys
  • Sale!
    Unlike many of the cheaper Nas steps out there this one does come with the tuv approved certificate to allow you to tow. Made by the same manufacturer for land rover you can be assured that this is a legal rear NAS step, powder coated in black and with the original tread step and all the fixings to allow you to fit.
  • Land Rover Defender one touch indicator upgrade kit. This complete plug and play upgrade adds the functionality of new vehicles equipped with lane change or 3 flash indicators to your Defender. With a simple momentary press of the indicator stalk the indicators will flash 3 times. We believe to date this is the most comprehensive and compact kit of its class for the Defender.
  • Land Rover Defender Pair of Front Mud Flap Brackets - MTC3000 & MTC3001, pair of front mud flap brackets, suitable for all Land Rover Defenders. This is for the bracket only, and doesn't include the rubber flap.
    This corresponds to the following part numbers:
    MTC3000, MTC3001
    This will fit the following vehicles:
    Land Rover Ninety/One Ten
    Land Rover Defender
  • Land Rover Defender Pair of Front Mud Flap Brackets - MTC3000 & MTC3001 Extented 30mm , pair of front mud flap brackets, suitable for all Land Rover Defenders. This is for the bracket only, and doesn't include the rubber flap.
    This corresponds to the following part numbers:
    MTC3000, MTC3001 extended 30mm 
    This will fit the following vehicles:
    Land Rover Ninety/One Ten
    Land Rover Defender