-
OLD MAN EMU COIL SPRINGS Code: DA8923 Rear Lift - Up to 55mm Defender - 110 Defender - 130 Spring rate - 420lbf/in / 74N/mm Free height - 435mm Defender - 110. Load - 500kgs Defender - 130. Load - 400kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. -
SWING AWAY REAR DOOR MOUNT SPARE WHEEL CARRIER Code: DA2274 With half door tailgate Defender -
Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material.
Pioneered in Australia in the early 1980’s, Safari Snorkels were born out of a need to protect 4WD engines from the hazards of dust and water commonly encountered in touring and off road applications. Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability. In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust. Note - Fitment from seated internal view. -
Land Rover Defender 110 side steps , Black powder coated with either rubber tread plate or silver chequer plate, these side steps are a great addition to your landy, easy to fit as uses existing mounts. manufactured in the UK to a high standard. -
this is a new aftermarket product to the range made to a very high quality. These tail gates bet battered when used daily so keep the appearance of your truck back to its original state. -
Defender 90 (1985 onwards) chunky ‘Ebony and Ivory’ side steps (‘Fire and Ice’ style) These chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Landrover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Tinted polyarbonate alpine roof glass replacement dark tinted polycarbonate kite mark stamped r43 automotive comes as a pair with new rubbers & filler trim perfect for off roading -
Land rover defender twin drl bumper-Mild steel Made out of mild steel then powder coated in Textured black to give a quality look. The LED lights are Ring and the holes they are put in have been machine pressed so the light is slightly counter sunk so not flush. This really does enhance your defender to a more modern look.- Powder coated in textured black
- Ring Automotive lights
- Comes with instructions to wire up
- Mild Steel
-
These chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
OLD MAN EMU SHOCK ABSORBER Code: DA8911 Front PAIR Defender - 90, 110 & 130 Discovery 1 Range Rover Classic Open length - 553mm Closed length - 329mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Upper & Lower Bush Mount Kit - DA6805 -
OLD MAN EMU SHOCK ABSORBER Code: DA8921 Rear Defender - 90 & 110 Discovery 1 Range Rover Classic Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Telfon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mounting Kit - DA6806 -
OLD MAN EMU SHOCK ABSORBER Code: DA8913 REAR PAIR Defender - 90 & 110 - heavy-duty Defender - 130 Discovery 1 - heavy-duty Range Rover Classic - heavy-duty Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mount Kit - DA6806
-
SWING AWAY REAR DOOR MOUNT SPARE WHEEL CARRIER Code: DA2232 Defender - all models Series -
Enhance the look of your Defender by fitting the top of the range SVX front grille. Molded from AB plastic (no fiberglass) as original manufacturer. Fantastic quality and easy to fit The SVX Land Rover Defender was a special edition 60th anniversary model from Land Rover and the front grille kits are now hard to find. Suitable for cars with or without air conditioning. This is a quality aftermarket product finished in Gloss Black paint with a protective lacquer coating Fits: Land Rover 90/110 (including 2.5N/A, 2.5 Turbo, V8) Land Rover 90/110 Defender 200 Tdi Land Rover 90/110 Defender 300 Tdi Land Rover 90/110 Defender Td5 Land Rover 90/110 Transit engine Package Contents:- 1x Front Grille
- 1x LHS Headlight Surround
- 1x RHS Headlight Surround
- 2x Inner Headlight Brackets
-
Enhance the look of your Defender by fitting the top of the range SVX front grille. Molded from AB plastic (no fiberglass) as original manufacturer. Fantastic quality and easy to fit The SVX Land Rover Defender was a special edition 60th anniversary model from Land Rover and the front grille kits are now hard to find. Suitable for cars with or without air conditioning. This is a quality aftermarket product finished in Silver paint with a protective lacquer coating Fits: Land Rover 90/110 (including 2.5N/A, 2.5 Turbo, V8) Land Rover 90/110 Defender 200 Tdi Land Rover 90/110 Defender 300 Tdi Land Rover 90/110 Defender Td5 Land Rover 90/110 Transit engine -
GRILLE & HEADLAMP SURROUND SET Code: DA1357 Santorini Black Defender Enhance your Defender's appearance! Land Rover Defender Standard Grille Gloss black Finish. will transform your truck instantly, The one piece radiator frame grille with its honeycomb front is defiantly one of the nicest grilles on the market place. Does not come with badge
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
