• Must have security Product!! Defender ALARM/BBUS plug and play relocation loom. Thieves are disabling the BBUS before stealing either parts or your entire vehicle. With this in mind now available is a 1.5m plug and play extension harness it is possible to move the BBUS (battery back up sounder) from behind the headlight to a safe inaccessible location where it is not easily disabled by thieves. Also included is a modification to prevent the factory alarm system being easily shorted out! Alarm sounder not included.
  • Tinted polyarbonate alpine roof glass replacement dark tinted polycarbonate kite mark stamped r43 automotive comes as a pair with new rubbers & filler trim perfect for off roading
  • Defender 90 Window Trim Kit 2007 without cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them.
    • Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
    • DIY installation in under an hour. (Fitting service available.)
    • Ideal for replacing worn trim kits or converting a panel-van into a County spec.
    • Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
    • 3 colour options Black / Grey / Light Grey
  • Defender 90 Window Trim Kit 2007 with cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them. with these window trims you will smarten the look of your truck. quick and easy to fit with dramatic changes in minutes. we also sell the aluminium Grab handles and cargo netting if needed, please check out our other listings or click on the link below.
    • Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
    • DIY installation in under an hour. (Fitting service available.)
    • Ideal for replacing worn trim kits or converting a panel-van into a County spec.
    • Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
    • 3 colour options Black / Grey / Light Grey
  • Defender 90 Stainless Steel Side Entry Sills designed to give you a clean look rather than the unsightly bolts and carpet edge when entering your defender, These have been designed to replace the bolts showing by dropping the stainless steel plate into the holes then all you do is tighten up the nuts to locate into place. ( Do not over tighten the nuts as you can pull through the thread ) you may need to elongate the holes slightly as we all know the tolerances on each defender differ. The plate is also angled 25 degree to press into the carpet to keep this into place.
  • These panoramic window trim kits will transom the look of your truck to the 20th century, give the defender a wow factor and will defiantly turn peoples heads. Kit contains:
    • 2 x sides
    • Back quarter glass
    • Glue kits
    • Instructions
    Additional details:
    • Heat reflective coating
    • Darkest privacy glass legally available
    • EU dot marked and tested
    • High quality finish
  • Another quality designed and manufactured product by IRB developments These simple yet clever brackets increase the angle of the 2nd row door opening on all Land Rover Defender 110 Station Wagon and 110/130 Double-Cab models. With the brackets fitted, the 2nd row doors will now open to almost 90-degrees, greatly improving passenger entry and egress from the vehicle as well as making the loading of large cargo items easier. Manufactured from stainless-steel, the GMB Defender 2nd row door hinge extension kit is supplied with two brackets and all fixings required. Fitting time is approx 5 minutes per door.
  • Defender 110 – 2007 onwards – Crew cab pick up – no hi cap. Rear outer RHS
  • Defender 110 – 2007 onwards – Crew cab pick up – no hi cap. Rear outer LHS
  • Code: DA8092
    Bonnet
    • Defender - 2007 onwards

    Use it on your doors, floor, roof, bonnet and loadspace.

    Dynamat Xtreme is the highest efficiency sound deadening material available and the most effective product for stopping noise and vibration. Dynamat Xtreme can be used on any and all interior sheet metal and fibreglass body panels. The aluminium constraining layer is very moldable and conforms easily to all interior surfaces. The patented extra sticky butyl layer is formulated with VECTOR chemistry for the most amazing energy conversion capabilities ever. Use it on your doors, floor, roof, bonnet and loadspace for a quiet, cool and incredibly solid ride. > Create a solid, luxury car feel with a reduction in road noise. Stop resonance & vibrations, reduces buzzes & rattles. Improved sound. Get more bass. Hear more of your music. For use throughout your vehicle interior, the first step to an improved Land Rover. Britpart is the official Dynamat wholesaler in the Land Rover aftermarket.
  • Code: DA6641
    280 pieces.
    Box of assorted popular trim clips and fixings commonly used on Land Rovers. Supplied in a handy presentation box. Contents 35 x Rivet - AFU1075 15 x Trim fastener - ANR2224 15 x Scrivet - DYQ100230 15 x Scrivet - AWR3994 15 x Scrivet - DYQ100320 25 x Finisher clip - DYC101420 20 x Stud door casing - MWC9134 20 x Stud door casing - blue - MWC9134BLUE 20 x Fastener - MXC1800 60 x Snapsac - MWC3136 25 x Door casing stud - DKP5279L 15 x Fir tree roof insulation retainer - DA1634
  • Code: DA5726
    Black/ air leather
    Black polyurethane is combined with airleather inserts for the grip of the Quark. The upper section is thinner and gets thicker on the handle to improve comfort. Diameter 350mm Dish 40mm Spoke Color Black Grip Shape Circular Grip Section 28mm x 35mm Coating Material Polyurethane Coating Color Black Insert Black
  • Code: DA5539
    Full height Mesh type Black
    • Defender 110 - 2007 onwards - Station Wagon & Utility
  • Code: DA4649 Black Defender Suitable for 1 door