Performance
-
The Defend 1948 wheel is a pared back mechanical design with 5-way symmetry. The V-shaped spokes create the alternate linear and flared spacing which is a Kahn hallmark. Designed specifically for Land Rover vehicles, the wheel follows the same iconic design language, placing function on an equal footing with form. A centre cap is not supplied with this wheel. The Defend 1948 alloy wheels are designed to accommodate your original cap. If you require them, we ca The Defend 1948 wheel is a pared back mechanical design with 5-way symmetry. The V-shaped spokes create the alternate linear and flared spacing - a Kahn hallmark. Designed specifically for Land Rover vehicles, the wheel follows the same iconic design language, placing function on an equal footing with form. A centre cap is not supplied with this wheel. The Defend 1948 alloy wheels are designed to accommodate your original cap. If required, we can supply you original caps at additional cost. WHEEL SPECIFICATION Size : 8" x 16" Finish : Satin Black Material : Aluminium Classic look different to others on market These wheels are not designed for off-road use n supply you original caps at additional cost. WHEEL SPECIFICATION Size : 8" x 16" Finish : Satin Black Material : Aluminium Classic look different to others on market These wheels are not designed for off-road use -
Bilstein B6 Defender Kit with Ride Control function Are Suitable for all Defender TD5 and Puma (TDCI) Models. Performance you can feel. Adjustable Dampening straight from the drivers seat!. If you expect more damping power from your shock absorber – even under loads – the BILSTEIN B6 is the ideal solution. The product benefits at a glance: Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads Optimum adhesion and enhanced lane change stability in both day to day and extreme situations Marked improvement in safety and sportiness without additional spring changes (lowering) BILSTEIN gas pressure technology BILSTEIN mono-tube/Upside-Down technology, made in Germany Road-tested by BILSTEIN and fine-tuned No German TÜV registration required WHAT IS RIDE CONTROL? An exclusive system that enables settings to be made by means of push buttons on the controller Lightning-quick switching from convenient “normal“ mode to high-powered “sport“ setting -
300 Tdi VGT uprated turbocharger CODE : ASE04 Category: VGT & Hybrid Turbochargers Fits: Defender 300 Tdi, Discovery 300 Tdi, Range Rover 300 Tdi -
A brand new direct replacement high performance aluminium intercooler from AlliSport. This intercooler has been designed to directly replace the original smaller intercooler on the Land Rover Defender, Discovery or Range Rover 300Tdi engine and has 50% more surface area than the original. Combined with the correct tuning (instructions included) power will increase from 111bhp standard to 135bhp with a similar increase in torque. The greater cooling capacity will allow up to 20% increase in power and torque in the lower and mid-range revs. Customers regularly report 10-12% gain in economy. There are minimal alterations necessary to the vehicle, as the kit is a direct replacement. Because the intercooler is far more efficient than the standard item, the fuel pump will need setting to compensate for the change in mixture. The settings are straightforward and are covered in the comprehensive fitting instructions. As your vehicle is not electronically controlled, there is no ECU to remap, so we optimise the fuel and boost settings to match the intercooler mechanically. Cylinder head thermal stress is actually reduced as the EGT or combustion temperature is reduced dramatically Specification:- 50% greater surface area external dimensions as per original intercooler 65mm Thick special high performance vacuum brazed core Fully TIG welded in house Makes full use of the space available whilst keeping external dimensions the same Tuning instructions included -
Terrafirma Dakar Alloy Wheels for Defender Satin Black These incredibly strong 12 spoke Rally Raid style alloy wheels each have a load rating of 1450kg, which makes them suitable for on-road and heavy off-road use. Fitment: 90/110/130/D1/RRC 7x16 ET33- Satin black or silver
- load rating 1450kgs
- 7x16 ET33
- set of 4
-
DEFENDER TUNING BOX Code: DA4507 Power increases by 27bhp (20kw) Torque increases by 71Nm Defender - Puma 2.2Tdci The 2011 onwards 2.2 Tdci model Defender has new style piezo injectors and requires specialised tuning solutions. It is currently not possible to remap the ECU through the OBD port. This substantial new tuning unit is designed to plug directly into the wiring loom and requires no modification to the vehicle. Contained in waterproof housing so can be safely located in the engine bay. -
PSI POWER TUNING BOX Code: DA4436 Defender – 2.4Tdci – 2007 – 2011 Note – Will not override speed restrictor Power HP – Before – 121 / After – 153 Power KW – Before – 90 / After – 114 Torque Nm – Before – 360 / After – 424 Improves torque & mpg! The Power Box houses a digital microprocessor which intercepts the fuelling signals being transmitted from the ECU to the fuel pump; it then modifies them to ensure the exact amount of diesel required for enhanced performance. Such efficient use of the fuel optimises consumption, reduces smoke emissions and there is less engine stress, enhancing engine life in many cases. The Power Box improves torque enabling the vehicle to change gears earlier and hold higher gears at lower speeds, making driving more pleasurable. The unit fits using the original manufacturers plugs; these existing plugs are opened and the Power Box is secured in between. Full fitting instructions are included with every unit. Features > Plug-in unit > No intervention with the original ECU > 3-Year equipment warranty & 1-Year engine warranty on new vehicles (subject to conditions) > Compact size > Shock resistant & waterproof Benefits > Can be removed prior to sale or used as a selling point > Traceless > Peace of mind > Quality product which is legal & safe > Unobtrusive in interior of vehicle > No worries off road > A good investment -
Code: DA4368Heavy-duty Kit includes Plus 5" shock absorbers*- Defender 110 - from 1994 - wide bush
Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!
Kit contents - > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair > Radius arms - front & rear > Spring retainers - front & rear > Bush sets -
A brand new direct replacement high performance aluminium “Double Core” intercooler from AlliSport Ltd. This intercooler has been designed to replace the original smaller intercooler on the Land Rover Defender, Discovery or Range Rover 300 Tdi engine and has 80% more surface area than the original. We have designed this intercooler primarily for customers who have fitted close mounted extreme type winch bumpers where it is not possible to fit our larger front mounted intercooler. This model is a good compromise between our standard uprated model and the larger Option 2 front mount. Also suitable for cars with AC. Combined with the correct tuning (instructions included) power will increase from 111bhp standard to 141bhp with a similar increase in torque. Figures are taken from our customers own rolling road tests. The greater cooling capacity will allow up to 27% increase in power and torque in the lower and mid-range revs and improved throttle response. Customers regularly report 10-15% gain in economy. Please note, you may need to adjust the original intercooler/radiator surround frame to install this intercooler. Because the intercooler is far more efficient than the standard item, the fuel pump will need setting to compensate for the change in mixture. The settings are straightforward and are covered in the comprehensive fitting instructions supplied with the kit. As most Tdi vehicles are not electronically controlled, there is no ECU to remap, so we optimise the fuel and boost settings to match the intercooler mechanically. Post 1996 300 tdi Discovery Auto has electronic engine management, so please contact us for advice. Cylinder head thermal stress is actually reduced as the combustion temperature or EGT is reduced dramatically Specification:- Fits original position with minor modifications 115mm Thick special high performance vacuum brazed core Internal turbulators increase cooling capacity Ideal for vehicles fitted with close mounted inset winch or Air Conditioning 80% greater surface area than standard External dimensions as per original intercooler apart from extra thickness Fully TIG welded in house Makes full use of the space available whilst keeping external dimensions the same Tuning instructions included We use high quality vaccum brazed cores and all of our products are manufactured to British Standard! -
Substantial power torque & economy gains with this kit! A brand new design full size high performance intercooler from AlliSport Ltd. Gives 45% increase in power and torque! Improved core design with improved flow characteristics and redesigned “Bi-Fold” end tanks for extra strength. Our latest design is not only stronger but flows better as well as looking smarter! Designed to replace the original much smaller intercooler on the Land Rover Defender TD5. This Intercooler kit now fits both Air Con or non-Air Con vehicles. This intercooler is over twice the size of the original Land Rover item! This highly efficient product is designed and manufactured by AlliSport Ltd and comes ready to fit utilising the original pipe work and mounting brackets. Constructed using our ultra efficient vacuum brazed core design with internal “turbulators” to increase cooling capacity. CNC stamp cut for quality and consistency and fully TIG welded by hand all in house. The increased cooling capacity together with the appropriate electronic tuning can allow performance to be increased to over 190BHP with an improvement in fuel economy. Fuel economy increaces by, on average 10% with a reduction in cylinder head thermal stress. Thermal stress is actually reduced as the EGT or combustion temperature is reduced dramatically. In order to get the best from this upgrade the fuelling needs optimising to suit. Specification: Atmosphere controlled construction, high efficiency core Fin design allows air to flow through to water radiator Suitable for fast road or competition usee 600 x 330 x 60mm core size 760 x 340 x 60mm overall size 51mm tube connections High grade alluminium construction CNC stamp cut mounting brackets Fits original mounts and hoses TIG welded by hand -
Substantial power torque & economy gains with this kit! A brand new design full size high performance intercooler from AlliSport Ltd. Gives 45% increase in power and torque! Improved core design with improved flow characteristics and redesigned “Bi-Fold” end tanks for extra strength. Our latest design is not only stronger but flows better as well as looking smarter! Designed to replace the original much smaller intercooler on the Land Rover Defender TD5. This Intercooler kit now fits both Air Con or non-Air Con vehicles. This intercooler is over twice the size of the original Land Rover item! This highly efficient product is designed and manufactured by AlliSport Ltd and comes ready to fit utilising the original pipe work and mounting brackets. Constructed using our ultra efficient vacuum brazed core design with internal “turbulators” to increase cooling capacity. CNC stamp cut for quality and consistency and fully TIG welded by hand all in house. The increased cooling capacity together with the appropriate electronic tuning can allow performance to be increased to over 190BHP with an improvement in fuel economy. Fuel economy increaces by, on average 10% with a reduction in cylinder head thermal stress. Thermal stress is actually reduced as the EGT or combustion temperature is reduced dramatically. In order to get the best from this upgrade the fuelling needs optimising to suit. Specification: Atmosphere controlled construction, high efficiency core Fin design allows air to flow through to water radiator Suitable for fast road or competition usee 600 x 330 x 60mm core size 760 x 340 x 60mm overall size 51mm tube connections High grade alluminium construction CNC stamp cut mounting brackets Fits original mounts and hoses TIG welded by hand
-
The Puma 2.2/2.4 Tdci Ceramic clutch Fitted with an 8 paddle ceramic sprung drive plate, gives you an increase in up-take of 40% from the peddle, meaning the clutch grips and moves faster than the HD organic kit, meaning the Clutch cover itself is doing less work. It has also had a 20% increase in poundage from the O.E Land Rover kit. Needs 500 miles of soft driving at 1/4 throttle to allow all faces to mate and bed correctly. Failure to do so will end in a glazed drive plate and slip. The Clutch is Supplied with the Following: 1 x Clutch Plate 1 x Clutch Cover 1 x Release bearing (please note some 2.2 tdci models are fitted with a different type of release bearing, if the different type is fitted this will need to be purchased through a main agent) -
Code: DA1683Right hand drive- Defender - 2007 onwards
The Red Booster servo clutch kit makes your Defenders clutch much easier to press.
-
CLUTCHFIX Land Rover Defender Puma 2.2/2.4 Tdci Clutch Fitted with HD1, the top commercial lining manufactured and used by Clutchfix Ltd, is a heavy duty application for drivers running a remapped engine, upto 210BHP. We use this material for the fleets we look after including the 200Tonne Liebherr Cranes run by Ainscough Crane hire. It has also had a 20% increase in poundage from the O.E Land Rover kit. It is a great daily drive, giving you peace of mind that it is a better grade of material than that supplied by Land Rover. It will deal with some green laning and towing (nothing too serious). The Clutch is Supplied with the Following: 1 x Clutch Plate 1 x Clutch Cover 1x bearing and slave kit -
Full set Land Rover Defender - Bilstein B6 Shock Absorber Kit. Supplied: 2x front gas shock Absorber, 2x rear gas shock Absorber The BILSTEIN B6 shock absorber is the perfect solution if you require more dampening power and efficiency in your suspension setup, including under heavier loads; but don't require a full all-out sports model. BILSTEIN B6 shock absorbers are fully road-tested for road handling capability and endurance. This package of BILSTEIN B6 gas dampers will transform any Defender, providing a vastly improved ride and handling. Much smoother ride with considerably less harshness (potholes and road bumps in the road will be much less noticeable!). Suitable for use with the original springs, or with any of our standard height, or lowering springs that we supply.- Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
- Optimum adhesion and enhanced lane change stability in both day to day and extreme situations
- Marked improvement in safety and sportiness without additional spring changes such as lowering your vehicle
- BILSTEIN gas pressure technology
- BILSTEIN mono-tube/Upside-Down technology, made in Germany
- Road-tested by BILSTEIN and fine-tuned
- No German TUV registration required
This item will fit the following model/s:
- Land Rover Defender 90/110
-
Land Rover Defender Light Weight Steering Guard Bolwer Used in the Defender Challenge, the lightweight steering guard will offer protection to steering arms and linkages, but also offers access for maintenance. Available in either Black or Graphite, it uses existing mounting points and both colours come with 2 x red towing eyes for recovery work.- Original Bolwer product
- Light weight
- Available in Black or Graphite
- 2 x Red towing eys