• EGR BLANKING & SILICONE HOSE KIT Code: DA1108TDI Kit contains - blue silicone hoses, EGR kit & Jubilee clips Defender - 300Tdi engine Discovery 1 - 300Tdi engine Range Rover Classic - 300Tdi engine Better fuel economy... Improved performance... A Britpart EGR (exhaust gas recirculation) blanking kit enables you to remove the original mechanical EGR from the vehicle resulting in better fuel economy and improved performance. Britpart silicone hoses are quality intercooler hoses designed to operate at a higher temperature then the original hoses. Fits with both standard and performance intercoolers. Will not rot or perish like standard rubber hoses.
  • PSI POWER TUNING BOX Code: DA4436 Defender – 2.4Tdci – 2007 – 2011 Note – Will not override speed restrictor Power HP – Before – 121 / After – 153 Power KW – Before – 90 / After – 114 Torque Nm – Before – 360 / After – 424 Improves torque & mpg! The Power Box houses a digital microprocessor which intercepts the fuelling signals being transmitted from the ECU to the fuel pump; it then modifies them to ensure the exact amount of diesel required for enhanced performance. Such efficient use of the fuel optimises consumption, reduces smoke emissions and there is less engine stress, enhancing engine life in many cases. The Power Box improves torque enabling the vehicle to change gears earlier and hold higher gears at lower speeds, making driving more pleasurable. The unit fits using the original manufacturers plugs; these existing plugs are opened and the Power Box is secured in between. Full fitting instructions are included with every unit. Features > Plug-in unit > No intervention with the original ECU > 3-Year equipment warranty & 1-Year engine warranty on new vehicles (subject to conditions) > Compact size > Shock resistant & waterproof Benefits > Can be removed prior to sale or used as a selling point > Traceless > Peace of mind > Quality product which is legal & safe > Unobtrusive in interior of vehicle > No worries off road > A good investment
  • ANTI-ROLL BARS Code: STC8156AAPY Defender 90 Defender 110 Defender 130 Discovery 1 Range Rover Classic Stiffen up your vehicle Front & rear yellow kit complete with Britpart yellow polyurethane bushes and fitting instructions. Only suitable for vehicles with the chassis and axle brackets fitted. Note - To fit these anti-roll bars to the rear of a Defender 90 Td5 - 2 x EGP1661L & 2 x EGP1889 are required Defender 110/130 - 2 x NRC5674 & 2 x 592773 are required
  • Code: DA4368
    Heavy-duty Kit includes Plus 5" shock absorbers*
    • Defender 110 - from 1994 - wide bush

    Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!

    Kit contents - > Springs - front & rear - pair > Britpart Cellular Dynamic Shock Absorbers - front & rear - pair > Radius arms - front & rear > Spring retainers - front & rear > Bush sets
  • Code: DA1350
    Black
    Made in the UK exclusive for Bowler, these lightweight, high strength wheels are TUV tested and are used in the Defender Challenge. They are 7.5" wide and will accept tyres ranging from 235 - 265 wide (including the standard 16" Land Rover options of Continental Cross Contacts or Goodyear MTR). Maximum load rating 1,250kg.
  • Code: DA5726
    Black/ air leather
    Black polyurethane is combined with airleather inserts for the grip of the Quark. The upper section is thinner and gets thicker on the handle to improve comfort. Diameter 350mm Dish 40mm Spoke Color Black Grip Shape Circular Grip Section 28mm x 35mm Coating Material Polyurethane Coating Color Black Insert Black
  • Code: DA4260
    Corresponds to ESR4238
    • Defender 90/110/130 - Td5 - 1999 - 2007
    • Discovery 2 - 4.0i - 1999 - 2004
    • Discovery 2 - Td5 - 1999 - 2004
    • Freelander 1 - V6 petrol
    • Range Rover P38 - diesel from WA376580
    • Range Rover P38 - diesel from TA346794 up to VA376579
    • Range Rover P38 - petrol from XA410482
    • Range Rover P38 - petrol from VA346794 up to VA376579
    • Range Rover P38 - petrol from WA385949 up to WA410481

    A breath of fresh air for your Land Rover

    > Tailored to fit your Land Rover > Maximum breathing efficiency for your engine means more power or better fuel mileage > No compromise on quality - the engine gets more air but the dirt particles are trapped by the quality filters > No need to replace as easy cleaning means maximum performance guaranteed > Easy fit, directly replaces standard air filter > Ideal for use in hot dusty conditions to reduce engine wear > Compatible with snorkels, ideal for use in conjunction with other performance modifications > Filters don't need pre-oiling and if the filter gets dirty there is no need to use a cleaner to clear the dirt on the filter - just use air, water or detergent

    Breathing efficiency for your engine means more power or better fuel mileage

  • Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material.

    Pioneered in Australia in the early 1980’s, Safari Snorkels were born out of a need to protect 4WD engines from the hazards of dust and water commonly encountered in touring and off road applications. Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability. In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust. Note - Fitment from seated internal view.
  • Defender / Discovery Tunit V-CR original Power Chip original defender / Discovery Standard BHP   122 / 137 TUNIT  V-CR original BHP    145 / 160
    Original TUNIT V-PD
    • ORIGINAL MANUFACTURER'S PLUG
    • 10 POSITION ADJUSTMENT
    • 3 YEAR PRODUCT WARRANTY
    • 1 YEAR ENGINE & DRIVELINE WARRANTY
  • TUNIT ADVNTAGE II TD5 POWER CHIP Defender / Discovery Tunit V-CR original Power Chip original defender / Discovery Standard BHP   122 / 137 TUNIT  ADVANTAGE II   BHP    159 / 165
    TUNIT ADVANTAGE II
    • PERFORMANCE PLUS SOFTWARE
    • 10 POSITION ADJUSTMENT
    • ORIGINAL MANUFACTURER'S PLUG
    • 2 YEAR ENGINE & DRIVELINE WARRANTY
    • 5 YEAR PRODUCT WARRANTY
  • Land Rover Discovery TD5 Full Silicone Hose Kit, With standard rubber hoses they become weaker over time splitting, cracking where silicone will last longer as it transfers heat much more efficiently. Give your Defender Puma  engine bay a new look by adding the hoses, but also giving you confidence that they will not split like the Land rover original ones. many colours available. Not only they will last longer but will enhance the look of your engine bay. Hoses do not come with the Jubilee Clips

    Oem hoses they replace are

    1. PEH101080
    2. PEH101120
    3. PBH101980
    4. PCH002070
    5. PEH101660
    6. PEH101690
  • Land Rover Defender TD5 Silicone Top hose, With standard rubber hoses they become weaker over time splitting, cracking where silicone will last longer as it transfers heat much more efficiently. Not only they will last longer but will enhance the look of your engine bay. Hoses do not come with the Jubilee Clips
  • Land Rover Defender TD5 Heater matrix silicone hoses, With standard rubber hoses they become weaker over time splitting, cracking where silicone will last longer as it transfers heat much more efficiently. Not only they will last longer but will enhance the look of your engine bay. Hoses do not come with the Jubilee Clips
  • Land Rover Defender Bilstein B6 Steering Damper is the perfect solution if you require more dampening power and efficiency in your suspension setup, including under heavier loads; but don't require a full all-out sports model. BILSTEIN B6 shock absorbers are fully road-tested for road handling capability and endurance. The benefits of BILSTEIN B6 shock absorbers are:

    Bilstein B6 Steering Damper Defender advantages. 

    • Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
    • Optimum adhesion and enhanced lane change stability in both day to day and extreme situations
    • Marked improvement in safety and sportiness without additional spring changes such as lowering your vehicle
    • BILSTEIN gas pressure technology
    • BILSTEIN mono-tube/Upside-Down technology, made in Germany
    • Road-tested by BILSTEIN and fine-tuned
    • No German TUV registration required
    Discovery 1 & Range Rover Classic
  • Land Rover Defender 30mm Front Anti Roll bar 90/110 with SuperPro bush kit to help give your Land Rover a much sharper turn in, and give you much more confidence on the road. We recommend you use a lowering spring and also the Bilstien shocks we can offer. If your looking for that all round shock set up then i recommend this kit.
    1.  1 x front  Antiroll bar 30MM 90/110
    2.  1 x front SuperPro bush kit
  • A brand new direct replacement high performance aluminium intercooler from AlliSport. This intercooler has been designed to directly replace the original smaller intercooler on the Land Rover Defender, Discovery or Range Rover 300Tdi engine and has 50% more surface area than the original. Combined with the correct tuning (instructions included) power will increase from 111bhp standard to 135bhp with a similar increase in torque. The greater cooling capacity will allow up to 20% increase in power and torque in the lower and mid-range revs. Customers regularly report 10-12% gain in economy. There are minimal alterations necessary to the vehicle, as the kit is a direct replacement. Because the intercooler is far more efficient than the standard item, the fuel pump will need setting to compensate for the change in mixture. The settings are straightforward and are covered in the comprehensive fitting instructions. As your vehicle is not electronically controlled, there is no ECU to remap, so we optimise the fuel and boost settings to match the intercooler mechanically. Cylinder head thermal stress is actually reduced as the EGT or combustion temperature is reduced dramatically Specification:- 50% greater surface area external dimensions as per original intercooler 65mm Thick special high performance vacuum brazed core Fully TIG welded in house Makes full use of the space available whilst keeping external dimensions the same Tuning instructions included