Defender - non-ABS and ABS models from LA up to 2007
Save time and money with a Britpart CV Joint kit!
Britpart has put together these boxed kits to help the fitter have all the necessary parts to do the job in one hit, saving time and money trying to find the necessary parts to do the job. These kits are also helpful to pass over the trade counter instead of having to hunt for the individual parts.
One kit does one CV joint.
SHOCK ABSORBER & SPRING KIT
Code: DA4286HD
Super Gaz
Heavy-duty
40mm lift
Defender 90
Discovery 1
Range Rover Classic
Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!
Kit contents
> Springs - front & rear - pair
> Britpart Super Gaz Shock Absorbers - front & rear - pair
Shock Absorbers
Britpart Super Gaz Shock Absorbers offer a 35mm bore tube filled with Fuchs shock absorber fluid, using the best seal available, single piece eye rings, polyurethane bush mounts and a very durable powder coated finish. These offer a vast improvement in ride quality and damping performance.
Coil Springs
Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs.
Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading.
As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
BRITPART PERFORMANCE LIFTED SPRINGS
Code: DA4206
Rear pair
Lift - 40mm
Load - 100kg
Defender 110
Bar diameter - 17mm
Rate - 270-295lbs/in
Free height - 445mm
The right choice when replacing the old sagging original springs!
Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs.
Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading.
As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
BRITPART PERFORMANCE LIFTED SPRINGS
Code: DA4205
Rear pair
Lift - 50mm
Load - 200kg
Defender 90
Discovery 1
Discovery 2
Range Rover Classic
Bar diameter - 19mm
Rate - 360lbs/in
Free height - 430mm
The right choice when replacing the old sagging original springs!
Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs.
Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading.
As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
BRITPART PERFORMANCE LIFTED SPRINGS
Code: DA4208
Rear pair
Lift - 50mm
Load - 500kg
Defender 110
Defender 130
Bar diameter - 21mm
Rate - 420lbs/in
Free height - 445mm
The right choice when replacing the old sagging original springs!
Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs.
Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading.
As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
BRITPART PERFORMANCE LIFTED SPRINGS
Code: DA4202
Front pair
Lift - 40mm
Load - 50kg
Defender 90
Defender 110
Defender 130
Discovery 1
Range Rover Classic
Bar diameter - 16mm
Rate - 230lbs/in
Free height - 390mm
The right choice when replacing the old sagging original springs!
Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs.
Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading.
As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
SHOCK ABSORBER & SPRING KIT
Code: DA4287C
Cellular Dynamic
Heavy-duty
40mm lift
Defender 110
Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!
Kit contents
> Springs - front & rear - pair
> Britpart Cellular Dynamic Shock Absorbers - front & rear - pair
Shock Absorbers
The Britpart Cellular Dynamic Shock Absorber represents a significant advance in Land Rover suspension systems.It features a cellular foam insert instead of a normal nitrogen gas or air, this is to stop the oil from boiling. The foam takes up less room which means more room for oil, 50% more, which offers maximum heat dispersion. This heat dispersion translates to a very subtle but controlled ride that will not fade no matter how hard you push them. They are ideal for a driver who needs more control to complement performance improvements or to enhance a standard vehicle. The unique design ensures ride comfort and cornering ability is maximised and of course they are superb off-road.
> Cellular technology tube
> Sintered 18mm rod
> Reinforced welded mounts
> Polyurethane bush
> Single piece eye ring
> Heavy-duty powder coating
Coil Springs
Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs.
Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading.
As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
SHOCK ABSORBER & SPRING KIT
Code: DA4287
Super Gaz
Heavy-duty
40mm lift
Defender 110
Britpart can offer a complete or partial suspension package suitable for whatever you intend to use your Land Rover for!
Kit contents
> Springs - front & rear - pair
> Britpart Super Gaz Shock Absorbers - front & rear - pair
Shock Absorbers
Britpart Super Gaz Shock Absorbers offer a 35mm bore tube filled with Fuchs shock absorber fluid, using the best seal available, single piece eye rings, polyurethane bush mounts and a very durable powder coated finish. These offer a vast improvement in ride quality and damping performance.
Coil Springs
Britpart performance springs are high quality, versatile and competitively priced - the right choice when replacing the old sagging original springs.
Developed by one of the world's top spring manufacturers these high quality, powder coated yellow springs have been designed with the needs of today's Land Rover owners in mind. Britpart performance lifted springs have the added benefit of improving your vehicles approach and departure angles which in turn allows you to overcome more obstacles when off-roading.
As Land Rovers are often working vehicles as well as the family car, uprated springs must offer the ability to carry loads, handle off-road terrain and provide a good ride on road. The progressive springs offer a compliant ride when lightly loaded, but firm up as the load increases.
TWIN SHOCK BRACKETS - KIT
Code: DA6324
Rear
Defender
Discovery 1
Range Rover Classic
Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum
One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber brackets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease.
The single shock absorber bracket is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean.
The twin shock absorber bracket is manufactured from the same quality steel as the single shock absorber bracket but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the brackets.
Notes
> Rear brackets involve some welding to fit.
> Fitting shock absorber brackets may require some vehicle modification, please ask distributor for full details.
SINGLE SHOCK TURRETS
Code: DA6323L
2” Lift
Front
Defender
Discovery 1
Range Rover Classic
Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum
One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber turrets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease.
The single shock absorber turret is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean.
The twin shock absorber turret is manufactured from the same quality steel as the single shock absorber turret but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the turrets.
Note - Fitting shock absorber turrets may require some vehicle modification, please ask distributor for full details.
OLD MAN EMU COIL SPRINGS
Code: DA8912
Rear
Lift - Up to 40mm
Defender - 90
Discovery 1
Discovery 2
Range Rover Classic
Spring rate - 300/340lbf/in / 52/60N/mm
Free height - 420mm
Defender - 90. Load - 200kgs
Discovery 1. Load - 100kgs
Discovery 2. Load - 100kgs
Range Rover Classic. Load - 100kgs
> Manufactured from state of the art micro-alloyed spring steel for superior strength and durability.
> Double scragged before and after shot peening to reduce spring stress and enhance spring life.
> Exceptional resistance to sagging and corrosion.
> Springs are designed for each vehicle to match the spring to the specific applications.
> Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency.
> Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle.
> Durable, hard wearing black powder coat.
> Designed and manufactured in Australia.
Notes
Caution: Due to altered gearbox mounts on models after 1998 any lift above.
OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft.
On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
Front Stainless steel powder-coated wild bear silver Dislocation cones. Made to a high standard to cope with the extreme off roading. Manufactured in UK.
Fits
Defender
Discovery 1
Range Rover Classic
Land Rover Defender Rear Bilstein B6 shocks, Ideal gas pressure shock for both on and off road use. Better handling better performance to standard shocks.
Precise adjustments increase the suspensions carrying capacity, and reduce uncontrolled movement on SUVs and light trucks. A more confident steering feel guarantees better control of your vehicle, safer handling and increased traction.
Land Rover Defender Front Bilstein B6 shocks, Ideal gas pressure shock for both on and off road use. Better handling better performance to standard shocks.
Precise adjustments increase the suspensions carrying capacity, and reduce uncontrolled movement on SUVs and light trucks. A more confident steering feel guarantees better control of your vehicle, safer handling and increased traction.
Fully adjustable suspension lift rod kit
Discovery 3 & Discovery 4.
Fully adjustable suspension lift rod kit. These adjustable rods replace the plastic and rubber parts Land Rover supply on the vehicle. Made from aluminium with an industrial heavy grade rubber bushing, the aluminium parts are anodised black to help with corrosion protection and blending in when in the garage for work.
The lift rods have two settings; standard and off-road. With the vehicle set to normal driving height the shortened rods will give you off-road height. If you select off-road height the vehicle will be in the ‘super extended position as standard if you use the ‘shortened settings. The ease of changing the ride height is what separates these rods from others in the marketplace.
No tools are required and should take no more than 2 minutes to do all four rods. Access to the front is over the front wheels and for the back is through the rear wishbones (blanket required!) Note - If run for a long time in off-road position then wheels may need realigning
Depending on the modifications required this kit re-positions the rear shock mount upwards by 50mm giving more down travel.
Quality manufactured from mild steel, Laser cut, pressed and/or folded coated in black powder-coating for that extra protection from the elements.
Made to last these spring blocks are designed to increase under-body ground clearance. Fitted between the spring seats and the axle they negate the need for costly spring upgrades. This is a pair for front.
Discovery 2 1998-2004
WildBear Rear catcher dislocation cones made from 5mm steel, zinc coated and powder-coated in Wildbear Grey. Manufactured in the UK to a very high standard to cope with the extreme off Roading conditions.
Inverted Dislocation cones made from 5 mm thick steel, zinc plated and powder-coated Wildbear Grey. Comes with all fixings and Manufactured in the UK to a high standard to cope with the extreme off roading conditions.
Defender 50mm Lift Blocks Front & Rear
WildBear Defender / Discovery 1 50mm Lift blocks front and rear.
Zinc plated and powder coated wildbear silver, manufactured in UK to very high standard using 5 mm steel
fits
Defender
Discovery 1
Land Rover Defender Bilstein B6 Steering Damper is the perfect solution if you require more dampening power and efficiency in your suspension setup, including under heavier loads; but don't require a full all-out sports model. BILSTEIN B6 shock absorbers are fully road-tested for road handling capability and endurance. The benefits of BILSTEIN B6 shock absorbers are:
Bilstein B6 Steering Damper Defender advantages.
Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
Optimum adhesion and enhanced lane change stability in both day to day and extreme situations
Marked improvement in safety and sportiness without additional spring changes such as lowering your vehicle
BILSTEIN gas pressure technology
BILSTEIN mono-tube/Upside-Down technology, made in Germany
Land Rover Defender 30mm Front Anti Roll bar 90/110 with SuperPro bush kit to help give your Land Rover a much sharper turn in, and give you much more confidence on the road. We recommend you use a lowering spring and also the Bilstien shocks we can offer.
If your looking for that all round shock set up then i recommend this kit.