Suspension

  • Defender / Discovery 1 rear 2" shock droppers zinc plated and powder-coated. Manufactured in the UK
  • Bilstein B6 Defender Kit with Ride Control function Are Suitable for all Defender TD5 and Puma (TDCI) Models. Performance you can feel. Adjustable Dampening straight from the drivers seat!. If you expect more damping power from your shock absorber – even under loads – the BILSTEIN B6 is the ideal solution. The product benefits at a glance: Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads Optimum adhesion and enhanced lane change stability in both day to day and extreme situations Marked improvement in safety and sportiness without additional spring changes (lowering) BILSTEIN gas pressure technology BILSTEIN mono-tube/Upside-Down technology, made in Germany Road-tested by BILSTEIN and fine-tuned No German TÜV registration required WHAT IS RIDE CONTROL? An exclusive system that enables settings to be made by means of push buttons on the controller Lightning-quick switching from convenient “normal“ mode to high-powered “sport“ setting
  • Defender 90" Rear Spring Retainers Heavy Duty A pair of heavy duty rear spring retainers, comes with bolts, washers and locking nuts. Zinc coated and powder coated to give them added protection for the extreme off road use. suitable for
    • Defender
    • Discovery 1
    • Range Rover Classic
  • Defender 90" Rear Spring Retainers Heavy Duty
  • Spring Retainer kit Defender 110" A spring retainer kit consisting of front and rear heavy duty. comes with fixings and zinc coated and then powder coated.
  • Spring Retainer kit Defender 90" A spring retainer kit consisting of front and rear heavy duty. comes with fixings and zinc coated and then powder coated.
  • LAND ROVER DEFENDER FRONT TUBULAR SHOCK TURRETS (2) These tubular turrets are stronger and less liable to rusting than the original. (galvanised) *pair* This product fits: Land Rover Discovery 1 Land Rover Defender Range Rover Classic
  • When suspention lift kits are fitted it increases the distance between the transfer box flange and the axle.The increased distance can cause the propshaft to run out of spline travel, Fitting this 40mm propshaft spacer helps return the shaft to its normal operating length therefore allowing full spline travel and prevents binding of the yokes.

    Manufactured in the UK 

    Fits Land Rover Discovery 1 & 2,

    Defender (all models), Range Rover Classic and P38

    Kit includes:

    1 x Matt BLACK Anodised Spacer

    1 x kit of nut and bolts

  • Wildbear Bump Stop Extensions for defender or discovery, 1 x pair of 1" extensions. Manufactured in the UK to very high standard and shot blasted primed and powdercoated in wild bear silver to give a longer lasting protection.
  • Full set Land Rover Defender - Bilstein B6 Shock Absorber Kit. Supplied: 2x front gas shock Absorber, 2x rear gas shock Absorber The BILSTEIN B6 shock absorber is the perfect solution if you require more dampening power and efficiency in your suspension setup, including under heavier loads; but don't require a full all-out sports model. BILSTEIN B6 shock absorbers are fully road-tested for road handling capability and endurance. This package of BILSTEIN B6 gas dampers will transform any Defender, providing a vastly improved ride and handling. Much smoother ride with considerably less harshness (potholes and road bumps in the road will be much less noticeable!). Suitable for use with the original springs, or with any of our standard height, or lowering springs that we supply.
    • Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
    • Optimum adhesion and enhanced lane change stability in both day to day and extreme situations
    • Marked improvement in safety and sportiness without additional spring changes such as lowering your vehicle
    • BILSTEIN gas pressure technology
    • BILSTEIN mono-tube/Upside-Down technology, made in Germany
    • Road-tested by BILSTEIN and fine-tuned
    • No German TUV registration required

    This item will fit the following model/s:

    • Land Rover Defender 90/110
  • Land Rover Defender 2002 On Wards Super Pro Kit SuperPro Polyurethane suspension bushes are engineered to provide outstanding performance over any terrain whilst maintaining reliability. While Improving your vehicles handling and stability, SuperPro bushes will not cause harshness or vibrations which are associated with other manufacturers Polyurethane products. Also, unlike rubber which starts to deteriorate from the day it is fitted, SuperPro Polyurethane bushes are not effected when exposed to Petrol, oil, Diesel, salt, water, ultra-violet light or airborne contaminants. In addition to this, a comprehensive R&D process and a unique blend of materials means that SuperPro bushes keep going long after OEM or rubber aftermarket bushes have failed. All the bushes in this kit are also covered by the unrivalled 3 Year/ 36,000 Mile warranty.

    Kit consists of

    2x ANR3410 Panhard Rod Bushes 4x NTC7307 Front Radius Arm to Axle Bushes 4x NRC4514 Front Radius Arm to Chassis Bushes 2x NTC1772 Rear Trailing Arm to Axle Bushes 2x NRC7491 Rear Trailing Arm to Chassis Bushes 2x NTC1773 Upper Link (A Frame) Bushes
  • Land Rover Defender 25mm Rear Anti Roll bar 110 with SuperPro bush kit to help give your Land Rover a much sharper turn in, and give you much more confidence on the road. We recommend you use a lowering spring and also the Bilstien shocks we can offer. If your looking for that all round shock set up then i recommend this kit.
    1.  1 x front  Antiroll bar 25MM 90
    2.  1 x front SuperPro bush kit
  • Land Rover Defender 25mm Rear Anti Roll bar 90.

    Land Rover Defender 25mm Rear Anti Roll bar 90. with SuperPro bush kit to help give your Land Rover a much sharper turn in, and give you much more confidence on the road. We recommend you use a lowering spring and also the Bilstien shocks we can offer. If your looking for that all round shock set up then i recommend this kit.
    1.  1 x front  Antiroll bar 25MM 90
    2.  1 x front SuperPro bush kit
  • Land Rover Defender 30mm Front Anti Roll bar 90/110 with SuperPro bush kit to help give your Land Rover a much sharper turn in, and give you much more confidence on the road. We recommend you use a lowering spring and also the Bilstien shocks we can offer. If your looking for that all round shock set up then i recommend this kit.
    1.  1 x front  Antiroll bar 30MM 90/110
    2.  1 x front SuperPro bush kit
  • Land Rover Defender Bilstein B6 Steering Damper is the perfect solution if you require more dampening power and efficiency in your suspension setup, including under heavier loads; but don't require a full all-out sports model. BILSTEIN B6 shock absorbers are fully road-tested for road handling capability and endurance. The benefits of BILSTEIN B6 shock absorbers are:

    Bilstein B6 Steering Damper Defender advantages. 

    • Increased power reserves and service life, even when pulling transporters and trailers or during frequent journeys with loads
    • Optimum adhesion and enhanced lane change stability in both day to day and extreme situations
    • Marked improvement in safety and sportiness without additional spring changes such as lowering your vehicle
    • BILSTEIN gas pressure technology
    • BILSTEIN mono-tube/Upside-Down technology, made in Germany
    • Road-tested by BILSTEIN and fine-tuned
    • No German TUV registration required
    Discovery 1 & Range Rover Classic
  • Defender 50mm Lift Blocks Front & Rear WildBear Defender / Discovery 1 50mm Lift blocks front and rear. Zinc plated and powder coated wildbear silver, manufactured in UK to very high standard using 5 mm steel fits Defender Discovery 1