-
Croytec Puma vent bezels This product is designed and developed by Croytec specifically for Puma/ Tdci models of 90/110/130 from 2007 onwards. The vent bezels are easy to fit, they are a direct replacement of the original. Our standard finish is silver but all of our range of aluminium products are available in different anodised colours. for more details or want a different colour please email us to get availability and price. -
This product is a direct replacement of the original plastic items. The clock surrounds are machined from billet aluminium with great detail and have a clip fit machined into them so there are no adhesives, they just simply click fit into place. The Puma Clock Surrounds are supplied as a set of 3 for the speedometer, fuel and water temperature gauge and rev counter gauge and are the same for left and right hand drive vehicles. -
-
Defender 110 – 2007 onwards – Crew cab pick up – no hi cap. Rear outer LHS -
Defender 110 – 2007 onwards – Crew cab pick up – no hi cap. Rear outer RHS -
These panoramic window trim kits will transom the look of your truck to the 20th century, give the defender a wow factor and will defiantly turn peoples heads. Kit contains:- 2 x sides
- Back quarter glass
- Glue kits
- Instructions
- Heat reflective coating
- Darkest privacy glass legally available
- EU dot marked and tested
- High quality finish
-
Defender 90 Window Trim Kit 2007 with cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them. with these window trims you will smarten the look of your truck. quick and easy to fit with dramatic changes in minutes. we also sell the aluminium Grab handles and cargo netting if needed, please check out our other listings or click on the link below.- Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
- DIY installation in under an hour. (Fitting service available.)
- Ideal for replacing worn trim kits or converting a panel-van into a County spec.
- Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
- 3 colour options Black / Grey / Light Grey
-
Defender 90 Window Trim Kit 2007 without cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them.- Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
- DIY installation in under an hour. (Fitting service available.)
- Ideal for replacing worn trim kits or converting a panel-van into a County spec.
- Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
- 3 colour options Black / Grey / Light Grey
-
-
-
Defender 110 ‘Fire and Ice’ style ‘Ebony and Ivory’ side steps, These chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Protect your sills with these Defender 110 Tube Rock Sliders made from 76mm x 3.2mm Tube, Galvanised and powder-coated in textured Black. Made in the UK to a very high standard, Comes with all fixings. -
Defender 110 Crew Cab/side steps with chequer tread plate. These chunky sidesteps not only look great with an attractive checkerplate tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 110 crewcab also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land Rover.- QuickTread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive checkerplate tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included.
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 10-15 minutes per side*
- All Defender side steps have the option for zinc coating under the black powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Defender 110 (1985 onwards) chunky XS style side steps Available in Black chequer Tread plate or Silver Tread plate, select option when proceeding to checkout, For Piano style please see other listings. Also available in 90/110/130 These chunky XS sidesteps not only look great powder coated and topped with an attractive checker plate tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover.- Quick Tread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive checkerplate tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 5-10 minutes per side*
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Defender 110 sill chequer plate 3 door made by the same supplier as land rover. these come with the gaskets and fixing kits, The 3M Chequer plate with the 5 bar pattern is to a high quality. -
Defender 110 sill chequer plate 5 door made by the same supplier as land rover. these come with the gaskets and fixing kits, The 3M Chequer plate with the 5 bar pattern is to a high quality. -
Defender 90" Rear Spring Retainers Heavy Duty -
Defender 90 rear quarters chequer plate, Very high quality 3mm thick made by the OEM manufacturer and comes with all the fixings and the Foam gaskets. -
Another quality designed and manufactured product by IRB developments These simple yet clever brackets increase the angle of the 2nd row door opening on all Land Rover Defender 110 Station Wagon and 110/130 Double-Cab models. With the brackets fitted, the 2nd row doors will now open to almost 90-degrees, greatly improving passenger entry and egress from the vehicle as well as making the loading of large cargo items easier. Manufactured from stainless-steel, the GMB Defender 2nd row door hinge extension kit is supplied with two brackets and all fixings required. Fitting time is approx 5 minutes per door. -
Sale!
Unlike many of the cheaper Nas steps out there this one does come with the tuv approved certificate to allow you to tow. Made by the same manufacturer for land rover you can be assured that this is a legal rear NAS step, powder coated in black and with the original tread step and all the fixings to allow you to fit. -
Convert your bulb side repeaters to the new stylish LED versions. Comes with standard plug so plug and play, No need to cut wires. -
These are very bright and Good quality lights. POWER:50W LEDS:CREE LED Chips LUMENS:4000lm/2400LM COLOR TEMPERATURE:6000K VOLTAGE:10-30V DC BEAM:Hi-Low Beam WATERPROOF RATE:IP67 LENS:PC BESEL COLOR:BALCK/CHROME DRL COLOR:White OPERATIONTEMPERATURE:-40°C~60°C MATERIAL：Diecast Aluminum Housing SIZE:7INCH -
DEFENDER 7" LED HEADLAMPS LIGHTS BLACK are a great addition to add to your Defender, They are DOT / SAE and come with plug for plug and play, easy to fit. these are very bright and good value for money. DEFENDER 7"LED LIGHTS BLACK Power:60W Color Temperature:6000K-6500K Leds: 6pcs 10w Osram LED Bezel Color:Black Voltage:12-30V DC Luminous FLux:3400LM@hih beam,2800LM@low beam MATERIAL：Diecast Aluminum Housing WATERPROOF RATE:IP67 LENS:PC -
Power:60W Color Temperature:6000K-6500K Leds: 6pcs 10w Osram LED Bezel Color:CHROME Voltage:12-30V DC Luminous FLux:3400LM@hih beam,2800LM@low beam MATERIAL：Diecast Aluminum Housing WATERPROOF RATE:IP67 LENS:PC -
Defender 73mm light guard to protect your standard bulb or led lights. these not only protects your lights but also looks great modification. these will not fit the Nas lights please see other listings for this style. Guards are made from plastic so no corrosion with these so one less job to worry about. Easy to fit. -
Modernise your defender with these 95m led light. these are not cheap aftermarket range these are made by TruckLite with a guaranteed 2 year warranty. please note these do not have the connectors. Other Colours are available and plinths on other listings, if require any help please email or call us. Truck-Lite brings you the all New 837 LED Signal Lighting Range. All lamps are 12v and 24v allowing them to be used on a number of vehicles. The 837 lamps have a slim profile helping to enhance life of the product and reducing risk of breakage. With LED SMD technology these lights are insured to have a longer life but if anything should happen they are covered under a 2 year warranty offered by TruckLite. With the option of surface or recess mount and a single core wire this product is easy to wire and assemble. Also to ease fixing there is no need for special tools required when fixing this product. The 837 range is polarity protected allowing you to easily fit you lamps without the worry of blowing the LED’s. The whole 837 range are ECE and EMC approved. -
Modernise your defender with these 95m led light. these are not cheap aftermarket range these are made by TruckLite with a guaranteed 2 year warranty. please note these do not have the connectors. Other Colours are available and plinths on other listings, if require any help please email or call us. Truck-Lite brings you the all New 837 LED Signal Lighting Range. All lamps are 12v and 24v allowing them to be used on a number of vehicles. The 837 lamps have a slim profile helping to enhance life of the product and reducing risk of breakage. With LED SMD technology these lights are insured to have a longer life but if anything should happen they are covered under a 2 year warranty offered by TruckLite. With the option of surface or recess mount and a single core wire this product is easy to wire and assemble. Also to ease fixing there is no need for special tools required when fixing this product. The 837 range is polarity protected allowing you to easily fit you lamps without the worry of blowing the LED’s. The whole 837 range are ECE and EMC approved. -
Must have security Product!! Defender ALARM/BBUS plug and play relocation loom. Thieves are disabling the BBUS before stealing either parts or your entire vehicle. With this in mind now available is a 1.5m plug and play extension harness it is possible to move the BBUS (battery back up sounder) from behind the headlight to a safe inaccessible location where it is not easily disabled by thieves. Also included is a modification to prevent the factory alarm system being easily shorted out! Alarm sounder not included. -
Tinted polyarbonate alpine roof glass replacement dark tinted polycarbonate kite mark stamped r43 automotive comes as a pair with new rubbers & filler trim perfect for off roading -
Defender Black polished anodised Door Peg. replace your plastic handles with these great looking aluminium versions. -
Defender Silver polished anodised Door handle. replace your plastic handles with these great looking aluminium versions. -
Defender Black polished anodised Door Surrounds . replace your plastic handles with these great looking aluminium versions.
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
