-
Tinted polyarbonate alpine roof glass replacement dark tinted polycarbonate kite mark stamped r43 automotive comes as a pair with new rubbers & filler trim perfect for off roading -
-
-
-
-
Land rover defender twin drl bumper-Mild steel Made out of mild steel then powder coated in Textured black to give a quality look. The LED lights are Ring and the holes they are put in have been machine pressed so the light is slightly counter sunk so not flush. This really does enhance your defender to a more modern look.- Powder coated in textured black
- Ring Automotive lights
- Comes with instructions to wire up
- Mild Steel
-
These chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
The TD5 Organic Fitted with HD1, the top commercial lining manufactured and used by Clutchfix Ltd, is a heavy duty application for drivers running a remapped engine, upto 190BHP. We use this material for the fleets we look after including the 200Tonne Liebherr Cranes run by Ainscough Crane hire. It is a great daily drive, giving you peace of mind that it is a better grade of material than that supplied by LUK or Valeo.It will deal with some green laning and towing (nothing too serious). The Clutch is Supplied with the Following: 1 x Clutch Plate 1 x Clutch Cover 1 x Bearing -
-
OLD MAN EMU SHOCK ABSORBER Code: DA8911 Front PAIR Defender - 90, 110 & 130 Discovery 1 Range Rover Classic Open length - 553mm Closed length - 329mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Upper & Lower Bush Mount Kit - DA6805 -
OLD MAN EMU SHOCK ABSORBER Code: DA8921 Rear Defender - 90 & 110 Discovery 1 Range Rover Classic Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Telfon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mounting Kit - DA6806 -
OLD MAN EMU SHOCK ABSORBER Code: DA8913 REAR PAIR Defender - 90 & 110 - heavy-duty Defender - 130 Discovery 1 - heavy-duty Range Rover Classic - heavy-duty Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mount Kit - DA6806
-
SWING AWAY REAR DOOR MOUNT SPARE WHEEL CARRIER Code: DA2232 Defender - all models Series -
Enhance the look of your Defender by fitting the top of the range SVX front grille. Molded from AB plastic (no fiberglass) as original manufacturer. Fantastic quality and easy to fit The SVX Land Rover Defender was a special edition 60th anniversary model from Land Rover and the front grille kits are now hard to find. Suitable for cars with or without air conditioning. This is a quality aftermarket product finished in Gloss Black paint with a protective lacquer coating Fits: Land Rover 90/110 (including 2.5N/A, 2.5 Turbo, V8) Land Rover 90/110 Defender 200 Tdi Land Rover 90/110 Defender 300 Tdi Land Rover 90/110 Defender Td5 Land Rover 90/110 Transit engine Package Contents:- 1x Front Grille
- 1x LHS Headlight Surround
- 1x RHS Headlight Surround
- 2x Inner Headlight Brackets
-
Enhance the look of your Defender by fitting the top of the range SVX front grille. Molded from AB plastic (no fiberglass) as original manufacturer. Fantastic quality and easy to fit The SVX Land Rover Defender was a special edition 60th anniversary model from Land Rover and the front grille kits are now hard to find. Suitable for cars with or without air conditioning. This is a quality aftermarket product finished in Silver paint with a protective lacquer coating Fits: Land Rover 90/110 (including 2.5N/A, 2.5 Turbo, V8) Land Rover 90/110 Defender 200 Tdi Land Rover 90/110 Defender 300 Tdi Land Rover 90/110 Defender Td5 Land Rover 90/110 Transit engine -
The all-new Rigid Industries’ Radiance is the perfect solution for those who want Rigid’s legendary quality at a level everyone can attain. The Radiance is built with the same high-grade aluminum alloy housing as our legendary E-Series, but that’s where the visual similarities end. Inside, the Rigid Industries’ Radiance is feature-packed, with a black exposed printed circuit board, optimized forward projecting Broad Spot optics which combine the attributes of a spot and flood beam pattern, and back-lighting available in white, amber, red, blue and green. Large back-lit Rigid branding plates further add to the unique look of the Radiance. The Rigid Industries’ Radiance is for the customer who wants a truly custom look that only Rigid can provide. Available in 10” – 50” lengths, the Rigid Industries‘ Radiance is the perfect entry into Rigid Industries’ performance LED lighting.- *Professional Installation Recommended
- * E-Series Construction & Durability
- *High-grade Aluminum Alloy Housing and Heat Sink
- *Black Powder Coat Finish
- *Black Exposed Printed Circuit Board
- *Back-lighting available in White, Green, Red And Blue
- *Two Rigid Branding Plates with Back-Lighting
- Amber
- Red
- Yellow
- Green
- Blue
10 YEAR WARRANTY
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
