-
SILICONE TURBO HOSE KIT Code: DA3174B Intercooler hose kit 2 piece kit Defender - 2.4 Tdci Will not rot or perish > Quality silicone intercooler hoses designed to operate at a higher temperature then the original hoses. > Fits with both standard and performance intercoolers. > Will not rot or perish like standard rubber hoses. -
EGR BLANKING & SILICONE HOSE KIT Code: DA1108TDI Kit contains - blue silicone hoses, EGR kit & Jubilee clips Defender - 300Tdi engine Discovery 1 - 300Tdi engine Range Rover Classic - 300Tdi engine Better fuel economy... Improved performance... A Britpart EGR (exhaust gas recirculation) blanking kit enables you to remove the original mechanical EGR from the vehicle resulting in better fuel economy and improved performance. Britpart silicone hoses are quality intercooler hoses designed to operate at a higher temperature then the original hoses. Fits with both standard and performance intercoolers. Will not rot or perish like standard rubber hoses. -
OLD MAN EMU HANDLING KIT Code: DA2861 Medium-duty full kit Defender 110 > Fully integrated Old Man Emu handling kits for all ride types > Designed and tested by a team of specialist engineers in Australia > Superior performance across all terrain > Dramatically improved high and low speed control for increased comfort Any suspension modification should have a full wheel alignment to ensure the vehicle is set Note - Kit lifts Defender from standard height to between 1" & 2" dependent on kit fitted (winch etc) -
OLD MAN EMU HANDLING KIT Code: DA1740 Medium-duty full kit Defender 90 > Fully integrated Old Man Emu handling kits for all ride types > Designed and tested by a team of specialist engineers in Australia > Superior performance across all terrain > Dramatically improved high and low speed control for increased comfort Any suspension modification should have a full wheel alignment to ensure the vehicle is set Note - Kit lifts Defender from standard height to between 1" & 2" dependent on kit fitted (winch etc) -
OLD MAN EMU COIL SPRINGS D110 Code: DA6841 Rear Lift - Up to 40mm Defender 110 - Station Wagon Spring rate - 175/200lbf/in / 31/35N/mm Free height - 440mm Defender - 110. Load - Station Wagon > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. -
OLD MAN EMU COIL SPRINGS Code: DA8923 Rear Lift - Up to 55mm Defender - 110 Defender - 130 Spring rate - 420lbf/in / 74N/mm Free height - 435mm Defender - 110. Load - 500kgs Defender - 130. Load - 400kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU COIL SPRINGS Code: DA8922 Rear Lift - Up to 50mm Defender - 110 Defender - 130 Spring rate - 300lbf/in / 52N/mm Free height - 435mm Defender - 110. Load - 300kgs Defender - 130. Load - light load > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution - Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. Important DA8922 has reduced spring rate from OE to provide improved ride quality for light loads -
OLD MAN EMU COIL SPRINGS Code: DA8910 Front Lift - Up to 40mm Defender - 90, 110 & 130 - diesel Defender - 90, 110 - petrol Discovery 1 - diesel Range Rover Classic - diesel Spring rate - 225lbf/in / 39N/mm Free height - 390mm Defender - 90, 110 & 130 - diesel. Load - 50kgs Defender - 90, 110 - petrol. Load - 51 - 110kgs Discovery 1 - diesel. Load 50kgs Range Rover Classic - diesel. Load - 50kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU COIL SPRINGS Code: DA8924 Front Lift - Up to 40mm Defender - 90 - diesel Discovery 1 Range Rover Classic Spring rate - 285lbf/in / 50N/mm Free height - 385mm Load - 51 - 110kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU SHOCK ABSORBER Code: DA8913 REAR PAIR Defender - 90 & 110 - heavy-duty Defender - 130 Discovery 1 - heavy-duty Range Rover Classic - heavy-duty Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mount Kit - DA6806 -
OLD MAN EMU SHOCK ABSORBER Code: DA8921 Rear Defender - 90 & 110 Discovery 1 Range Rover Classic Open length - 560mm Closed length - 346mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Telfon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Lower Bush Mounting Kit - DA6806
-
OLD MAN EMU SHOCK ABSORBER Code: DA8911 Front PAIR Defender - 90, 110 & 130 Discovery 1 Range Rover Classic Open length - 553mm Closed length - 329mm Nitrocharger Sport shock absorbers introduces advanced dual-stack deflective disc technology that continuously adapts to the terrain, offering rapid response improvements to ride quality, handling and control. Available in the UK only. Features > Interactive, multi-stacked rebound and compression valving systems ensure optimal damping performance in all conditions. > Vehicle specific fine tuning for superior handling and ride performance. > Piston rod ‘slip ring’ provides more consistent and uniform damping performance. > Triple lipped oil seal with gas retention check valve design virtually eliminates contaminant damage and gas loss. > Impact resistant polymer dirt shield. > Balanced, 35mm Teflon banded piston assembly. > Teflon coated low friction glacier piston rod guide. > 18-25mm induction hardened chrome piston rod. > High quality replacement mounting bushes. > Australian made and engineered. Upper & Lower Bush Mount Kit - DA6805 -
OLD MAN EMU - STEERING DAMPER Code: DA8925 Defender Steering dampers with nitrogen charged foam cell for reduced wheel vibration and improved handling and control. Features > Massive 35mm bore. > 9 stage valving for optimum performance. > Stone guard. > Fits original mounts. > 50/50 valving. -
RACK MOUNT CLAMPS Code: SACS001 Single Single clamp > Anodized clamp - upper and lower sections > Protective rubbers - protects roll-cage finish > M8 stainless bolts and spring washers For mounting accessories such as a roof-rack, snorkel or aerial to your roll-cage. Suitable for any Safety Devices Expedition external roll-cage, as well as any other roll-cage which uses 45mm diameter tubing. The upper mounting hole is M8 threaded. -
DYNAMAT ROLLER Code: DA8098 Heavy-duty 2" wide To ensure proper adhesion with the strongest bond possible and with professional looking results. > Thick, plated steel frame > Water and rust resistant > 2” solid rubber roller > Comfort grip handle > Soft rubber will not scratch surface -
DYNAMAT XTREME SOUND DEADENING KIT Code: DA8076 Dynamat Xtreme sheet - ( BOX WITH 9 SHEETS ) EACH SHEET SIZE - 1.200 x 610mm Use it on your doors, floor, roof, bonnet and loadspace. Dynamat Xtreme is the highest efficiency sound deadening material available and the most effective product for stopping noise and vibration. Dynamat Xtreme can be used on any and all interior sheet metal and fibreglass body panels. The aluminium constraining layer is very moldable and conforms easily to all interior surfaces. The patented extra sticky butyl layer is formulated with VECTOR chemistry for the most amazing energy conversion capabilities ever. Use it on your doors, floor, roof, bonnet and loadspace for a quiet, cool and incredibly solid ride. > Create a solid, luxury car feel with a reduction in road noise. > Stop resonance & vibrations, reduces buzzes & rattles. > Improved sound. Get more bass. Hear more of your music. > For use throughout your vehicle interior, the first step to an improved Land Rover. DEFENDER UPGRADES MALAYSIA are pleased to be the official Dynamat distributor in the Land Rover aftermarket. -
SEAT BELT STRESS PLATE Code: DA3502 FIA specification stress plate with 65mm square backing plate and 7/16th captive nut. -
RED SEAT BELT Code: DA5079 Front RHS Defender - station wagon - Td5 onwards Add a splash of colour to your Defender’s interior by fitting a set of these red seat belts. Type approved. -
BRITPART EXPEDITION ROOF RACK Code: DA3072 2,050mm L x 1,500mm W Vehicle gutter to top of rack - 265mm 3 feet per side 32kg Defender 90 Extremely strong, versatile and easy to use These roof racks are manufactured from aluminium with a smart black powder coated finish. Fully welded, they are extremely strong, versatile, with a low profile and are easy to use. The floor plank profiles are orientated longitudinally which results in a reduction in wind noise. There are nut channels on all the extrusions to allow for easy fitment of 3rd party accessories. -
2" LIFT REAR RADIUS ARM Code: DA5510 Defender Discovery 1 Range Rover Classic Help contribute to a much better off-road capability > Designed for vehicles with an extended 1 to 3” lift. > Front radius arms correct castor alignment which in turn ensures safe driving. > Rear radius arms provide full rear axle articulation. > Fitting the radius arms will contribute to much better off-road capability for your vehicle by fully utilising your spring and shock absorber set. > Zinc passivated with a heavy-duty powder coating finish to complement each component and the Britpart coil springs. -
3-DEGREE HEAVY-DUTY RADIUS ARMS Code: DA5506 Wide / 45mm Defender Discovery 1 Range Rover Classic Help contribute to a much better off-road capability > Designed for vehicles with an extended 1 to 3” lift. > Front radius arms correct castor alignment which in turn ensures safe driving. > Rear radius arms provide full rear axle articulation. > Fitting the radius arms will contribute to much better off-road capability for your vehicle by fully utilising your spring and shock absorber set. > Zinc passivated with a heavy-duty powder coating finish to complement each component and the Britpart coil springs. Use with NTC6781 & DA2353 bushes -
ROOF CROSS RAIL Code: DA4711 Explorer roof rack Gutter mount 4kgs Defender 90 - hard top & station wagon Defender 110 - hard top & station wagon Defender 110 - double cab/crew cab pick-up Defender 130 - double cab/crew cab pick-up Additional roof cross rails for use without a roof rack for use as, for example, a roof bar, basic tent support, attaching a roof storage box or to spread additional load on the Safety Devices' roof rack. Refer to owners handbook for recommended maximum weight. -
RIVET Code: AFU1075 Replacement Pack Qty x 10 -
PLASTIC RIVET Code: AFU1075X Qty x 100
-
RED SEAT BELT Code: DA5058 Rear Equivalent to EVL501580PMAG Defender - station wagon Add a splash of colour to your Defender’s interior by fitting a set of these red seat belts. Type approved. -
SEAT BELT BLACK Code: BTR6563 -
RED SEAT BELT Code: DA5057 Front Equivalent to BTR6563 Defender - station wagon Add a splash of colour to your Defender’s interior by fitting a set of these red seat belts. Type approved. -
RING LED UNDER BONNET INSPECTION LAMP Code: DA5065 3 x 5W LEDs provide 1,000 lumens light output Features > Long operating time allows full working day usage. > 3 levels of light output. > 6000K colour temperature for bright white light. > 40° adjustable head to shine light on the engine bay exactly where it is required. > 60° wide angle illumination. > Sturdy polycarbonate, ABS and aluminium construction. > Rechargeable 3.7V 10,400mAh li-ion battery. > Hook design allows usage with different vehicle types including, cars, vans and 4x4s. > Illuminated battery status indicator. > Includes AC mains adaptor. Specfications > Light output: 1000 lumens (3 lamps) 675 lumens (2 lamps) 350 lumens (2 lamps) > Operating time: 6 hours (3 lamps) 10 hours (2 lamps) 15 hours (1 lamp) > Battery: 3.7V Li-ion 10400mAh 38.48Wh > Main adaptor: Input: 230V AC 50/60Hz > Output: 5V DC 2000mA -
XENON ULTIMA HEADLAMP UPGRADE Code: DA5014 Right hand drive kit H4 bulbs included Pair Defender Range Rover Classic Series More light on the road. Xenon 7” universal fit headlamp upgrade kit includes Xenon Ultima. Xenon Ultima is the first auto bulb to put 120% more light on the road. The lamps have a complex surface to give a superior light distribution. They are E approved, fully road legal and the kit includes headlamp units and xenon bulbs. -
ARB AWING ROOM WITH FLOOR Code: DA6832 2,500 x 2,100mm Designed to function as a fully enclosed room, the awning with floor provides additional weather protection and privacy. The awning room can be used with ARB awnings and features a durable floor, two large mesh windows with roll up blinds and a zippered door with both solid and mesh panels. It is fully enclosed with an integrated roof that hangs just below the main awning canvas. Rear wall features a central door that can be used to directly access the vehicle rear door or canopy depending on awning mounting position. Access points for 12v/240v power leads. Supplied with hardened steel pegs and adjustable tension straps. -
SAFETY DEVICES ROLL CAGE PADDING KIT Code: RBL1387PAD Black Defender 90 - Station Wagon without bulkhead, 2-door Padding kit for internal section of RBL1387SSS roll cage Unrivalled quality... Specially formulated polyurethane flame retardant padding kits of 55 Shore hardness. Kit covers all internal roll cage components above shoulder height. -
ROOF TENT MOUNTING BRACKET Code: 20-6000-755 Suitable for any Safety Devices Expedition external roll cage, as well as other roll-cages using 45mm diameter tubing.
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
