-
-
-
Defender 90 (1985 onwards) chunky ‘Ebony and Ivory’ side steps (‘Fire and Ice’ style) These chunky ‘Ebony and Ivory’ (‘Fire and Ice’ style) sidesteps not only look great with an attractive brushed stainless steel tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Landrover. If an unsightly LPG tank is fitted to your vehicle the sidestep can help to disguise it.- Bolt on design, no drilling required. Fitted in minutes.
- Unique chassis clamps attach to chassis outriggers using one spanner
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive brushed stainless steel tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- powder coating to enhance durability & wear.
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
this is a new aftermarket product to the range made to a very high quality. These tail gates bet battered when used daily so keep the appearance of your truck back to its original state. -
-
Land Rover Defender 110 side steps , Black powder coated with either rubber tread plate or silver chequer plate, these side steps are a great addition to your landy, easy to fit as uses existing mounts. manufactured in the UK to a high standard. -
Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material.
Pioneered in Australia in the early 1980’s, Safari Snorkels were born out of a need to protect 4WD engines from the hazards of dust and water commonly encountered in touring and off road applications. Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability. In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust. Note - Fitment from seated internal view. -
SWING AWAY REAR DOOR MOUNT SPARE WHEEL CARRIER Code: DA2274 With half door tailgate Defender -
OLD MAN EMU COIL SPRINGS Code: DA8923 Rear Lift - Up to 55mm Defender - 110 Defender - 130 Spring rate - 420lbf/in / 74N/mm Free height - 435mm Defender - 110. Load - 500kgs Defender - 130. Load - 400kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. -
-
HEAVY-DUTY STEERING ARMS Code: DA5502G 3 OEM track rod ends Defender 90 Defender 110 Improves steering response > Solid heavy-duty arms which are suitable for off-road use > Improves steering response > Zinc plate finish to increase corrosion resistance > With OEM track rod ends -
Sale!
Land Rover Defender Smoke 95mm LED Light 10PC Kit comes with Relay and plinths. modernise the look of your defender with the smoke led lights.all lights come with original plugs so no soldering them. ( plug and play ) these are easy to fit and will transform the look of your defender in minutes. for 73mm kits please check out other listings on lights.- 10pc LED light Kit
- Comes With Relay
- Comes with screws
- Comes with 10 plinths
- Plug and play
- Comes with original plugs
-
Defender 90 side steps, Black powder coated with either rubber tread plate or silver chequer plate, these side steps are a great addition to your landy, easy to fit as uses existing mounts. manufactured in the UK to a high standard.
-
TWIN SHOCK TURRETS Code: DA6322L 2” Lift Front Defender Discovery 1 Range Rover Classic Sometimes off-road conditions can be serious enough to test the standard equipment on your Land Rover to its maximum One of the critical components that takes most of the abuse is the suspension system. When using the standard single shock absorber configuration it is not unknown for the shock absorber to break the factory fitted turret mount. These shock absorber turrets from Britpart give you confidence that your vehicles suspension will tackle the terrain you take it through with greater ease. The single shock absorber turret is manufactured from heavy-duty steel and replaces the existing turret mount which is susceptible to corrosion by allowing a build up of dirt inside which is hard to clean thoroughly. The new design is harder wearing and easier to clean. The twin shock absorber turret is manufactured from the same quality steel as the single shock absorber turret but allows for the fitment of an additional shock absorber. The benefits of having extra shock absorbers fitted to your Land Rover is that any extreme force encountered is divided between the two shock absorbers for a more comfortable ride for you and your passengers. Using twin shocks is also beneficial when carrying loads both on and off-road as it improves the load carrying ability of the vehicle. An additional benefit is that when changing shock absorbers there is no need to remove the turrets. Note - Fitting shock absorber turrets may require some vehicle modification, please ask distributor for full details. -
Defender 90 (1985 onwards) chunky XS style side steps Available in Black chequer Tread plate or Silver Tread plate, select option when proceeding to checkout, For Piano style please see other listings. Also available in 90/110/130 These chunky XS sidesteps not only look great powder coated and topped with an attractive checker plate tread plate but are extremely practical too. They enable you to reach a roof rack and/or roof box far more easily on your Land Rover. The sidesteps are perfect for families with children and for people that are infirm as access is gained more comfortably to your vehicle. Having sidesteps fitted to your Defender 90 also helps to protect your clothing from any mud on your car. When parking your car at the shops, the sidesteps that are manufactured from heavy duty steel, offer a handy buffer in supermarket car parks. Any stray trolleys will touch the sidestep rather than denting the door or wing of your Land rover.- Quick Tread brand – made in the UK.
- Bolt on design, no drilling required. Fitted in minutes.
- Makes getting into or out of your vehicle easier
- Constructed of heavy duty steel, powder coated and topped with an attractive checkerplate tread plate.
- Price is per pair.
- Full fitting instructions with diagrams included
- Full 12 month warranty & the highest quality from the UK market leader – UK made!
- QuickTread means quick fitting – only 5-10 minutes per side*
- Please note: steps are not warranted for off road use. Off road use voids guarantee.
-
Enhance your Defender's look with a pair of these smart and robust side protectors. -
-
DOOR HINGE KIT Code: DA1070 Front row doors Torx head bolts Zinc plated finish Set of 4 Defender Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with torx head bolts and all other fixings > Complete with torx head bolt fixings -
A classic mushroom-top snorkel. If you're likely to be driving your Land Rover in circumstances which could mean wading deep water or driving in very dusty conditions then you should consider fitting a raised air intake to your vehicle. This version from Britpart is a classic mushroom-top snorkel for Defender. Featuring heavy-duty metal pipe work, cyclone pre-cleaner and a durable attractive Matt black finish. -
Sale!
Rigid D-SS SIDE SHOOTER LED CUBE LIGHT .... is One of Rigid’s most versatile, compact lighting solutions just got better with the D-SS, Dually SideShooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid’s popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid’s advanced Flood, Spot, or Driving optics, so there’s a D-SS lighting solution for nearly any application. The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.- life time guarantee
- comes with loom and relays
- gives better viability for side out put compared to other brands
-
2" LIFT REAR RADIUS ARM Code: DA5510 Defender Discovery 1 Range Rover Classic Help contribute to a much better off-road capability > Designed for vehicles with an extended 1 to 3” lift. > Front radius arms correct castor alignment which in turn ensures safe driving. > Rear radius arms provide full rear axle articulation. > Fitting the radius arms will contribute to much better off-road capability for your vehicle by fully utilising your spring and shock absorber set. > Zinc passivated with a heavy-duty powder coating finish to complement each component and the Britpart coil springs. -
Sale!
Out of stock
XS FRONT GRILLE & HEADLAMP SURROUND Code: DA1968 Black with silver mesh Defender - non-air-con The new XS Enhancement range from Britpart is the perfect way to give your Defender a fresh new look. The front grille, side grille and bonnet vent designs are exclusive to Britpart. For fixing kit please see DA1169 (qty x 2 required) & DA1138. -
Discovery TD5 side steps , Black powder coated with either rubber tread plate or silver chequer plate, these side steps are a great addition to your land rover , easy to fit as uses existing mounts. manufactured in the UK to a high standard. -
OLD MAN EMU COIL SPRINGS D110 Code: DA6841 Rear Lift - Up to 40mm Defender 110 - Station Wagon Spring rate - 175/200lbf/in / 31/35N/mm Free height - 440mm Defender - 110. Load - Station Wagon > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU COIL SPRINGS Code: DA8922 Rear Lift - Up to 50mm Defender - 110 Defender - 130 Spring rate - 300lbf/in / 52N/mm Free height - 435mm Defender - 110. Load - 300kgs Defender - 130. Load - light load > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution - Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. Important DA8922 has reduced spring rate from OE to provide improved ride quality for light loads -
OLD MAN EMU COIL SPRINGS Code: DA8910 Front Lift - Up to 40mm Defender - 90, 110 & 130 - diesel Defender - 90, 110 - petrol Discovery 1 - diesel Range Rover Classic - diesel Spring rate - 225lbf/in / 39N/mm Free height - 390mm Defender - 90, 110 & 130 - diesel. Load - 50kgs Defender - 90, 110 - petrol. Load - 51 - 110kgs Discovery 1 - diesel. Load 50kgs Range Rover Classic - diesel. Load - 50kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
OLD MAN EMU COIL SPRINGS Code: DA8924 Front Lift - Up to 40mm Defender - 90 - diesel Discovery 1 Range Rover Classic Spring rate - 285lbf/in / 50N/mm Free height - 385mm Load - 51 - 110kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils.
-
The Utility-45 is a heavy duty LED work light which combines the latest and most advanced LED systems with patent-pending design features for maximising light output, functionality, and reliability. 4 high density LEDs deliver outstanding levels of night-time illumination, with a colour temperature of 5,000 kelvin, carefully selected to maximise definition while reducing fatigue and strain that can come from using higher colour ranges. An innovative CAE optimised 'Matrix' cooling system increases surface area so that heat generated during operation of the lamp is more efficiently dissipated away from the unit, allowing the light output to be maximised for longer, simultaneously the Electronic Thermal Management system optimises light output considering the environmental and thermal conditions of the lamp. The Utility-45 comes available with 3 different lens options - Standard Diffused lens, providing a good balance of spread and intensity of light for the majority of tasks; Wide Diffused, for exceptional short-range visibility; and Dual-Zone Reeded, ideal if the lamps are going to be mounted less than 1m above the ground. Lenses are easily interchanged while maintaining the lamps IP67/IP69K rating. Built to last with a 2 year warranty as standard, the Utility-45 benefits from automotive grade corrosion resistance, while the integrity and functionality of the lamp is further enhanced through EMC protection which ensures no interference with any other electrical machinery or appliances. Over voltage and reverse polarity protection will further guard against accidental damage and increase the longevity of the lamp. Supplied with male/female Deutsch connectors (part no. DT06-2S/DT04-2P), optional extras include: a One-Lamp Wiring Harness Kit, and Quad-Core Dampening System to protect against extreme vibrations. Key Features * Fully ECE approved Work Light * 2 Year warranty * Made in Britain * CAE optimised 'Matrix' cooling system * Optional interchangeable lenses * Electronic thermal management * IP67/IP69K watertight * Automotive grade corrosion resistance * 5,000 kelvin light temperature for maximum definition * EMC protected - CISPR 25: 2008 * Over voltage protected * Reverse polarity protected * Male and female Deutsch connectors included * Optional Quad Core Dampening System protects against vibration -
Land rover Defender anti-rattle-kit-rear-sliding-windows proprietary rubberised window channel replaces the inferior factory felt lining in Land Rover® Defender rear sliding side windows and eliminates the famous glass 'chatter' common in these vehicles. Made from virgin (non-recycled) EPDM rubber for it's superior temperature and weather resistance, our window channel is impervious to ozone, making it fade-resistant. Upper flanges wrap out and around the window frame edge, so the glass never comes into contact with the metal, eliminating rattles. Inner surfaces are flocked to reduce friction allowing the window glass to slide freely in the channel. This kit is a complete solution, with enough window channel and rivets to restore both your driver and passenger side rear sliding windows. As an added touch, the kit also includes the correct #2 Pozidriv® ACR bit which prevents stripping of the hard-to-find screws that hold the window frame together.- 2 x 5-ft Flocked Rubber Extrusions
- 50 x Sealed POP Rivets
- 1 x bottle of GooGone®
- 1 x 3M® Final Stripping Pad
- 1 x Wooden Width Gauge Disc
- 1 x #2 Pozidriv® ACR Bit
- 1 x Full-Color Installation Guide
- Custom designed for Land Rover® Defender rear sliding side windows
- Tight, stay-put fit
- Wrap-around design covers aluminium edges
- EPDM Rubber
- Flocked inner surfaces
BENEFITS
- Cushions glass when closing windows
- Seals out moisture, dust and drafts
- Eliminates rattles
- Fade, tear and temperature resistant
- Glass slides freely in channel
-
Land Rover Defender Aluminium Roof Bars Fully Constructed from aluminium, the Defender Upgrades roof bar is light-weight and strong , finished in a black textured powder coating providing great looks, practical in use (grip) and a durable finish. All our roof bars, have an incorporated T-slot system which allows the easy fitment of accessories both on top , and underneath the roof bar meaning endless options and is fully customisable depending on your needs. you can even add your work lights to these bars too. The Kit Includes two Bars in each kit with all fixings and comes with 4 eyelets. Can be used with a roof tent but we advise you use 4 bars.- Made from Aluminium
- Comes with all fixings
- 4 x eyelets for strapping
- rubber feet to protect paint work
- no drilling required
-
OLD MAN EMU COIL SPRINGS Code: DA8912 Rear Lift - Up to 40mm Defender - 90 Discovery 1 Discovery 2 Range Rover Classic Spring rate - 300/340lbf/in / 52/60N/mm Free height - 420mm Defender - 90. Load - 200kgs Discovery 1. Load - 100kgs Discovery 2. Load - 100kgs Range Rover Classic. Load - 100kgs > Manufactured from state of the art micro-alloyed spring steel for superior strength and durability. > Double scragged before and after shot peening to reduce spring stress and enhance spring life. > Exceptional resistance to sagging and corrosion. > Springs are designed for each vehicle to match the spring to the specific applications. > Springs formed on computer controlled, precision mandrels to ensure manufacturing consistency. > Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle. > Durable, hard wearing black powder coat. > Designed and manufactured in Australia. Notes Caution: Due to altered gearbox mounts on models after 1998 any lift above. OE ride height may cause front driveline vibration that can only be rectified by fitment of a front double cardan propshaft. On Vehicles fitted with an OE inner helper coil such as fitted to some 110 and 130 models. The inner coil must be retained with OME coils. -
DOOR HINGE KIT Code: DA1275 2nd row doors Torx head bolts Zinc plated finish Set of 4 Defender Series 3 Defender 2007 onwards but can be used on earlier vehicles. Enhance your Land Rover's appearance! > Replacement zinc plated door hinges with torx head bolts and all other fixings > Complete with torx head bolt fixings
Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
