Code: DA5735
- Defender - up to FA
Interior
-
-
Code: DA1472- Defender - 2007 onwards
Enhance your vehicle’s interior with a set of these easy to fit leather cover gear levers!
-
INTERIOR DOOR HANDLE Code: DA8935 Anodised aluminium - Black Single Defender Defender Black polished anodised Door Handle. replace your plastic handles with these great looking aluminium versions. -
INTERIOR DOOR HANDLE Code: DA8936 Anodised aluminium - Silver Single Defender Defender Silver polished anodised grab handle. Replace your plastic handles with these great looking aluminium versions. -
-
BRAKE PEDAL SWITCH Code: PRC4297 -
-
-
-
-
Croytec Puma Seat Release Handles Puma Seat Release Handles are Designed and developed by Croytec specifically for the current production Defender Puma vehicles. These will fit all models of 90/110 county vehicles easy to fit, they are a direct replacement of the original handles for the release of the rear fold down seats. The handles are a high quality machined from billet aluminium and polished. They screw in place of the original handle. -
Croytec Puma vent bezels This product is designed and developed by Croytec specifically for Puma/ Tdci models of 90/110/130 from 2007 onwards. The vent bezels are easy to fit, they are a direct replacement of the original. Our standard finish is silver but all of our range of aluminium products are available in different anodised colours. for more details or want a different colour please email us to get availability and price. -
This product is a direct replacement of the original plastic items. The clock surrounds are machined from billet aluminium with great detail and have a clip fit machined into them so there are no adhesives, they just simply click fit into place. The Puma Clock Surrounds are supplied as a set of 3 for the speedometer, fuel and water temperature gauge and rev counter gauge and are the same for left and right hand drive vehicles. -
-
-
Code: DA1203- Defender - 2002 onwards
Does your Defender's rear door sometimes close on you unexpectedly?
This neat and easily installed gas strut kit will solve that problem and replaces the original door stopper. The gas strut will hold the door in place when open - even with a spare wheel in place - and will assist in the opening of the rear door too with a smoother and more controlled movement. Complete with fittings and instructions. -
Code: DA2440 Front - RHS Manual window Black Defender - 1987 up to 5A689036 Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2441 Front - LHS Manual window Black Defender - 1987 up to 5A689036 Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2480 Rear - RHS Manual window Black Defender Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2481 Rear - LHS Manual window Black Defender Replace your Defender's old tatty door cards with one of these smart plastic replacements. Easy to fit they are also easy to keep clean with a wipe clean finish. Includes fasteners. -
Code: DA2499 3 piece door lock button kit Defender -
Code: DA2603 Normal interior finish fascia plate Suitable for right & left hand drive models Defender - 2007 onwards Neat storage solution. This glove box is for the new Defender which utilises the available dashboard space. Ideal for storing all the usual small items you carry with you. Robust construction and easy to fit with all the necessary parts supplied. -
Code: DA2603CFCarbon fibre effect finish facia plate Suitable for right & left hand drive models- Defender - 2007 onwards
Neat storage solution.
This glove box is for the new Defender which utilises the available dashboard space. Ideal for storing all the usual small items you carry with you. Robust construction and easy to fit with all the necessary parts supplied. -
New black mesh trim Defender 'Chubby' box Extra padded lid! Fitting a Britpart ‘Chubby’ box in your Land Rover will not only help you keep your vehicle clutter free but it will also make driving more of a pleasure with the extra padded lid. Our standard cubby boxes have a 20mm thick lid while the ‘Chubby’ boxes have a lovely thick and comfy 80mm thick lid. With a double cup holder as standard, split drinks are a thing of the past. Hand-built in the UK, these quality cubby boxes are suitable for Series 3 and Defenders. Well crafted with precision tools using a hard wearing leatherette outer with locking stay brass hinges. Top - Black mesh Body - Black For Defender For Series 3 -
Code: DA4599Solves the problem of that crude and annoying blast of hot air to your lower legs.- Defender - 2007 onwards
The MUD Heater Deflector solves the problem of that crude and annoying blast of hot air to your lower legs in all Puma engine Defenders. The Heater Deflector redirects the flow of air from the lower heater outlets forwards into the footwell, rather than directly at your legs to create a more comfortable driving environment. The Heater Deflector moulding fixes easily in place using the supplied push-fit fasteners and can be fitted in 5-minutes. All you need is a 4.5mm drill. Position the Heater Deflector, drill the fixing holes in the lower dash section and fix the Heater Deflector in place using the push-fit fasteners. -
Code: DA4629Grey- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4629BBlack- Defender - except sunroof equipped models
Designed with CAD software.
> Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification. -
Code: DA4649 Black Defender Suitable for 1 door -
Code: DA5539Full height Mesh type Black- Defender 110 - 2007 onwards - Station Wagon & Utility
-
Code: DA5726Black/ air leatherBlack polyurethane is combined with airleather inserts for the grip of the Quark. The upper section is thinner and gets thicker on the handle to improve comfort. Diameter 350mm Dish 40mm Spoke Color Black Grip Shape Circular Grip Section 28mm x 35mm Coating Material Polyurethane Coating Color Black Insert Black -
-
Code: DA6641280 pieces.Box of assorted popular trim clips and fixings commonly used on Land Rovers. Supplied in a handy presentation box. Contents 35 x Rivet - AFU1075 15 x Trim fastener - ANR2224 15 x Scrivet - DYQ100230 15 x Scrivet - AWR3994 15 x Scrivet - DYQ100320 25 x Finisher clip - DYC101420 20 x Stud door casing - MWC9134 20 x Stud door casing - blue - MWC9134BLUE 20 x Fastener - MXC1800 60 x Snapsac - MWC3136 25 x Door casing stud - DKP5279L 15 x Fir tree roof insulation retainer - DA1634 -
Code: DA8092Bonnet- Defender - 2007 onwards
Use it on your doors, floor, roof, bonnet and loadspace.
Dynamat Xtreme is the highest efficiency sound deadening material available and the most effective product for stopping noise and vibration. Dynamat Xtreme can be used on any and all interior sheet metal and fibreglass body panels. The aluminium constraining layer is very moldable and conforms easily to all interior surfaces. The patented extra sticky butyl layer is formulated with VECTOR chemistry for the most amazing energy conversion capabilities ever. Use it on your doors, floor, roof, bonnet and loadspace for a quiet, cool and incredibly solid ride. > Create a solid, luxury car feel with a reduction in road noise. > Stop resonance & vibrations, reduces buzzes & rattles. > Improved sound. Get more bass. Hear more of your music. > For use throughout your vehicle interior, the first step to an improved Land Rover. Britpart is the official Dynamat wholesaler in the Land Rover aftermarket. -
-
Defender 110 – 2007 onwards – Crew cab pick up – no hi cap. Rear outer LHS -
Defender 110 – 2007 onwards – Crew cab pick up – no hi cap. Rear outer RHS -
Another quality designed and manufactured product by IRB developments These simple yet clever brackets increase the angle of the 2nd row door opening on all Land Rover Defender 110 Station Wagon and 110/130 Double-Cab models. With the brackets fitted, the 2nd row doors will now open to almost 90-degrees, greatly improving passenger entry and egress from the vehicle as well as making the loading of large cargo items easier. Manufactured from stainless-steel, the GMB Defender 2nd row door hinge extension kit is supplied with two brackets and all fixings required. Fitting time is approx 5 minutes per door. -
These panoramic window trim kits will transom the look of your truck to the 20th century, give the defender a wow factor and will defiantly turn peoples heads. Kit contains:- 2 x sides
- Back quarter glass
- Glue kits
- Instructions
- Heat reflective coating
- Darkest privacy glass legally available
- EU dot marked and tested
- High quality finish
-
Defender 90 Stainless Steel Side Entry Sills designed to give you a clean look rather than the unsightly bolts and carpet edge when entering your defender, These have been designed to replace the bolts showing by dropping the stainless steel plate into the holes then all you do is tighten up the nuts to locate into place. ( Do not over tighten the nuts as you can pull through the thread ) you may need to elongate the holes slightly as we all know the tolerances on each defender differ. The plate is also angled 25 degree to press into the carpet to keep this into place. -
Defender 90 Window Trim Kit 2007 with cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them. with these window trims you will smarten the look of your truck. quick and easy to fit with dramatic changes in minutes. we also sell the aluminium Grab handles and cargo netting if needed, please check out our other listings or click on the link below.- Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
- DIY installation in under an hour. (Fitting service available.)
- Ideal for replacing worn trim kits or converting a panel-van into a County spec.
- Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
- 3 colour options Black / Grey / Light Grey
-
Defender 90 Window Trim Kit 2007 without cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them.- Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
- DIY installation in under an hour. (Fitting service available.)
- Ideal for replacing worn trim kits or converting a panel-van into a County spec.
- Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
- 3 colour options Black / Grey / Light Grey
-
Tinted polyarbonate alpine roof glass replacement dark tinted polycarbonate kite mark stamped r43 automotive comes as a pair with new rubbers & filler trim perfect for off roading -
Must have security Product!! Defender ALARM/BBUS plug and play relocation loom. Thieves are disabling the BBUS before stealing either parts or your entire vehicle. With this in mind now available is a 1.5m plug and play extension harness it is possible to move the BBUS (battery back up sounder) from behind the headlight to a safe inaccessible location where it is not easily disabled by thieves. Also included is a modification to prevent the factory alarm system being easily shorted out! Alarm sounder not included. -
Defender Black polished anodised Door Peg. replace your plastic handles with these great looking aluminium versions. -
Defender Black polished anodised grab handle. Replace your plastic handles with these great looking aluminium versions. -
Defender Silver polished anodised Door handle. replace your plastic handles with these great looking aluminium versions. -
LOCKING PEG Code: DA8944 DA8943 Anodised aluminium - Silver OR Black Single Defender Defender Silver OR Black polished anodised Door Peg. replace your plastic handles with these great looking aluminium versions. -
REPLACEMENT MAIN GEAR AND TRANSFER GEAR LEVER SET Code: DA6600 Anodised alloy Pair Defender - LT77 gearbox Enhance your Defender's appearance! Smart alloy replacement main gear lever and transfer gear lever set. Replace your tired old plastic gear lever knobs with a pair of these stylish new CNC machined alloy ones. A smart design that is anodised for durability and will enhance the interior of any Defender with LT77 gearbox.