Call Us Today! +6012-220 5085|sales@defenderupgrades.com.my
  • Code: DA4629
    Grey
    • Defender - except sunroof equipped models

    Designed with CAD software.

    > Supplied with interior lamp extension loom and DIN blanking panel. > Fitting kit and instructions are also supplied. The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines. The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product. It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts. Will the Defender roof console fit my vehicle? The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification.
  • LEVER Code: TSC500020
  • RED SEAT BELT Code: DA5058 Rear Equivalent to EVL501580PMAG Defender - station wagon Add a splash of colour to your Defender’s interior by fitting a set of these red seat belts. Type approved.
  • Land Rover Defender 4.3 Inch OEM Mirror Monitor Kit with wedge camera and mirror arm adaptor that fits direct to your original fitting. This will give you the opportunity to have a rear verse camera on the mirror head so you can see whats behind you when your reversing.

    Mirror head

    DESCRIPTION

    • OEM Style
    • Slimline
    • Multi Channel
    • Discreet Look
    • Compatible With All Cameras
    • Multi Vehicle Specific Brackets Avaliable
    • On Screen Display Menu

    SPECIFICATION

    • 12 Volts
    • 2 x Video In (Phono)
    • 1 x Trigger Reverse Feed (Positive)
    • 2.5m Cable
    • W:270mm  H:92mm  D:45mm

    Wedge camera

    • Wide Angle
    • Rear Fixing
    • Small and Discreet
    • Rear Fixing
    • 8m Cable Included
  • Syncro Gearboxes is delighted to announce the Defender Puma/TDCI Slickshift! This new innovative design exclusive to Syncro Gearboxes improves gear change by reducing sloppiness and minimising travel, as well as neatening shifts giving smoother gear changes.

    The Syncro Gearboxes’ Slickshift is easy to fit and allows you to use your original gear stick. Within thirty minutes you can have a Defender that feels less like a Transit!

    The Defender Puma/TDCI Slickshift from Syncro Gearboxes is a comprehensive kit which contains the following:
    • CNC machined Pivot
    • CNC machined Inner Gear Stick
    • Aluminium anodised Retaining Block
    • CNC Machined Nylon Spacer
    • 4 x M5 Allen-Head Bolts
    • M10 Grub Screw and nut
      The Defender Puma Slickshift is for Defender Puma TDCI ONLY and can be fitted using a basic tool kit within 30 mins/TDCI. 1 spanner difficulty ratin
  • Tinted polyarbonate alpine roof glass replacement dark tinted polycarbonate kite mark stamped r43 automotive comes as a pair with new rubbers & filler trim perfect for off roading
  • Defender 90 Window Trim Kit 2007 with cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them. with these window trims you will smarten the look of your truck. quick and easy to fit with dramatic changes in minutes. we also sell the aluminium Grab handles and cargo netting if needed, please check out our other listings or click on the link below.
    • Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
    • DIY installation in under an hour. (Fitting service available.)
    • Ideal for replacing worn trim kits or converting a panel-van into a County spec.
    • Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
    • 3 colour options Black / Grey / Light Grey
  • Defender 90 Window Trim Kit 2007 without cutouts for windows Comes with 2 sides and 2 rear window quarters, These are direct replacements for the original panels and made to a very good quality. Slightly stiffer than the original but fit perfect. These are for the 2007 on models but will fit the early vehicles with some light trimming to the bottom part where it goes around the Bulk head. Also has the rear seat belt holes to allow you to out in rear seats if not already have them.
    • Rear side window internal trims AND quarterlight internal trims (4 pieces - see thumbnails)
    • DIY installation in under an hour. (Fitting service available.)
    • Ideal for replacing worn trim kits or converting a panel-van into a County spec.
    • Equivalent to official Land Rover part numbers EQT500480LOY, EQT500490LOY, EQT500620LOY, EQT500630LOY
    • 3 colour options Black / Grey / Light Grey
  • Galvanised and powder coated in textured black, Made from 76mm x 3.2mm tube and 5mm plate, Made to a very high quality and manufactured in the UK.
  • Code: DA7305 Black/Red fabric SINGLE Defender - excluding truck cabs* Redesigned bolsters for greater support and new padding configurations for improved comfort > Lightweight and compact > High comfort > Tubular frame construction > High quality recline mechanism for smooth and easy adjustment > Compatible with 3 or 4 fixing point harnesses > Base mounted - 271 x 345mm Drawing on decades of racing history, Sparco has created a line of street car seats that offer the ultimate in comfort and performance. The ergonomic designs help cradle and protect the driver against even the most demanding lateral forces. The R100 is Sparco’s latest incarnation of groundbreaking steel-model seats. It features redesigned bolsters for greater support and new padding configurations for improved comfort. It has been built with comfort and support in mind but it's lower side bolsters and slightly narrower steel frame allow it to fit into vehicles where fitting seats with larger side bolsters may be difficult. The seat features backrest harness slots so that it can be used with a race type harness or normal seatbelts. The seats can be reclined using the double adjuster lever. Made from a durable fabric, the R100 is available in single tone or duo-tone styles. Duo-tone styles feature contrasting side accenting and stitching to match any interior. The Sparco R100 Seat range is designed to attach using Sparco vehicle specific seat mounts. *Not suitable for vehicles with truck cabs fitted as they restrict the leg room in the vehicle.
  • Features & Benefits

    • This fascia kit allows the installation of an aftermarket head unit into a non din sized aperture
    • High quality finish designed to match the vehicle dashboard
    • Complete fascia kit, supplied with either brackets or metal cage to mount the aftermarket double din head unit
    Vehicle application guide
    MANUFACTURER MODEL NOTE YEAR FROM YEAR TO HEADUNIT CONNECTION
    LAND ROVER DEFENDER 2007 2016 N//A
  • DOUBLE DIN FASCIA PLATE Code: DA2681

    Features & Benefits

    • This fascia kit allows the installation of an aftermarket head unit into a non din sized aperture
    • High quality finish designed to match the vehicle dashboard
    • Complete fascia kit, supplied with either brackets or metal cage to mount the aftermarket double din head unit
    Vehicle application guide
    MANUFACTURER MODEL NOTE YEAR FROM YEAR TO HEADUNIT CONNECTION
    LAND ROVER DEFENDER 2007 2016 N//A
  • Out of stock
    Land Rover Defender Momo Millennium sport wheel 14" Red are Produced from the finest leather and aluminium, the MOMO Millennium Sport steering wheel offers the perfect driving experience, it’s no wonder it’s one of the most popular wheels in the MOMO Tuning range. Featuring chrome accents on the rim, a chrome centre ring surrounding the genuine leather MOMO horn centre pad, airleather inserts on the grip flanked by striking coloured leather piping, and brushed aluminium cut-out spokes, the Millennium Sport provides the driver with a stylish, sporty design worthy of its popularity.